The paper guides rest against the edges of the envelopes.

Notes:

Do not load envelopes with holes, perforations, cutouts, or deep embossing.

Do not use envelopes that have exposed flap adhesive.

Envelopes require more drying time. Remove each envelope as it exits, and allow it to dry to avoid ink smudging.

Loading labels

You can load up to 25 sheets of labels at a time.

1Load labels with the print side facing you and the top of the sheet fed into the printer first.

2Make sure:

The print side of the labels faces you.

The top of the labels feeds into the printer first.

The adhesive on the labels does not extend to within 1 mm of the edge of the labels.

You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.

The labels are loaded in the center of the paper support.

The paper guides rest against the edges of the labels.

Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink smudging.

Loading greeting cards, index cards, photo cards, and postcards

You can load up to 25 greeting cards, index cards, photo cards, or postcards at a time.

1Load cards with the print side facing you.

2Make sure:

The cards are loaded in the center of the paper support.

The paper guides rest against the edges of the cards.

Note: Photo cards require more drying time. Remove each photo card as it exits, and allow it to dry to avoid ink smudging.

42

Page 42
Image 42
Lexmark 4800 Series manual Loading labels