Lexmark 4800 Series Error messages on the printer display, Remove tape from print cartridge, 147

Error messages on the printer display

Alignment Error

These are possible solutions. Try one or more of the following:

Remove tape from print cartridge

1Remove the print cartridge.

2Make sure the sticker and tape have been removed.

1

2

3Reinsert the cartridge.

4Press to align the cartridge.

For more information, see “Aligning print cartridges” on page 97.

Use new paper

Load only plain, unmarked paper for aligning the cartridge.

The printer will read any markings on used paper, which could cause the alignment error message to appear.

Cartridge Error (1102, 1203, 1204, or 120F)

1Remove the print cartridges, and close the cartridge carrier lids.

2Close the scanner unit.

3Disconnect the power cord from the electrical outlet.

4Reconnect the power cord to the electrical outlet.

5If the button is not lit, press .

6Reinsert the print cartridges and close the cartridge carrier lids.

7Close the scanner unit.

If the error does not reappear, the problem has been corrected.

If the problem reappears, one of the cartridges is not working properly. Continue with the following procedure to determine which cartridge is not working properly.

1Remove the print cartridges, and close the cartridge carrier lids.

2Close the scanner unit.

3Disconnect the power cord from the electrical outlet.

4Reconnect the power cord to the electrical outlet.

5If the button is not lit, press .

6Reinsert the black (or photo) print cartridge and close the cartridge carrier lid.

7Close the scanner unit.

147