Lexmark 4800 Series manual Software does not install

Disconnect and reconnect the power cord

1Disconnect the power cord from the wall outlet, and then from the printer.

2Plug the cord all the way into the power supply on the printer.

2

1

3Plug the cord into an electrical outlet that other electrical devices have been using.

4If the light is not on, press .

Software does not install

These are possible solutions. Try one or more of the following:

Check your operating system

The following operating systems are supported: Windows Vista, Windows XP, Windows 2000, and Mac OS X versions 10.34 and 10.4 (not versions 10.0, 10.1, or 10.2).

Note: Windows 2000 users should use Service Pack 3 or later.

Check your system requirements

Check that your computer meets the minimum system requirements listed on the printer box.

Check USB connection

1Check the USB cable for any obvious damage.

2Firmly plug the square end of the USB cable into the back of the printer.

3Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with the USB symbol.

Check wireless connection

Check that the Wi-Fi indicator light is on. For more information, see “Understanding the parts of the printer” on page 16.

Reinstall the software

1Turn off and then restart your computer.

2Click Cancel on all New Hardware Found screens.

3Insert the CD, and then follow the instructions on the computer screen to reinstall the software.

102