Lexmark 4800 Series manual Printing all photos from a memory device

Printing all photos from a memory device

1Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

2Insert a memory card or flash drive.

3From the control panel, press .

4Press repeatedly until Print All Photos is highlighted.

5Press .

6Press or to select the number of photos to be printed on a page.

7Press .

8If you want to adjust the print settings:

aPress .

bMake your selections using the control panel buttons.

cPress to save your selections.

9 Press to print.

Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Printing photos stored on a memory device using the proof sheet

1Load plain letter- or A4-size paper.

2Insert a memory card or flash drive.

3From the control panel, press .

4Press repeatedly until Photo Proof Sheet is highlighted.

5Press .

6Press or to specify which category of photos you want to print. You can print a proof sheet:

•For all photos on the memory card

•For the 20 most recent photos, if there are 20 or more photos on the card

•By date, if the photos on the card were taken on different dates. If you choose this option, use the arrow buttons on the control panel to choose the date range, then press to save your selections.

7Press .

8Press again.

One or more proof sheets print.

9Follow the instructions on the proof sheet to select which photos to print, the number of copies per photo, red-eye reduction, page layout, print options, and paper size.

Note: When making selections, make sure to fill in the circles completely.

10Load the proof sheet facedown on the scanner glass.

74