Lexmark 4800 Series manual Click Automatically save all photos to My Pictures

If the printer is connected to a wireless network, you will be asked to select the computer that you want to use.

aPress or to select a computer.

bPress .

If you set a PIN during network setup and are being asked for it:

1Enter the PIN using the and to select a digit location and the and to select a value for that digit.

2Press .

cPress to begin saving photos to the computer.

dFollow the instructions on the computer screen.

Transferring all photos from a memory card using the computer

1Insert a memory card into the printer with the label facing the printer control panel. If the computer is connected to a wireless network, you will need to select the printer.

Note: For a network connection, you must manually open the application and select the printer you want to use. The Productivity Studio software launches automatically on your computer.

2Click Automatically save all photos to “My Pictures”.

3If you want to erase the photos from the memory card, click Yes.

Note: Make sure all the photos have been copied before you click Yes to erase.

4Click Done. Remove the memory card to view your transferred photos in the Library.

Transferring selected photos from a memory card using the computer

1Insert a memory card into the printer with the label facing the printer control panel. The Productivity Studio software launches automatically on your computer.

Note: For a wireless network connection, you must first open the application and then select the printer you want to use.

2Click Select photos to save.

3Click Deselect All.

4Click to select the photo(s) you want to transfer.

5Click Next.

6If you want to save the photos to the default folder, click Next.

7If you want to save the photos in a folder other than the default folder:

aClick Browse.

bSelect the folder you want.

cClick OK.

8If you want to assign a prefix to all of the photos you just transferred, click the check box and enter a name.

9Click Next.

63