PICTURE FEATURES
PICTURE FEATURES
DIGITAL VNR | AUTO |
COLOUR SYSTEM 4:3 AUTO ASPECT
BACK
TV OK
To display the PICTURE FEATURES menu:
1 Press the a button to display MENU (main menu).
2 Press the 6 button to choose PICTURE FEATURES, and press the abutton.
■DIGITAL VNR
The DIGITAL VNR function cuts down the amount of noise in the original picture.
You can choose from the three DIGITAL VNR function set- tings of AUTO, MIN and MAX.
Note:
•If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can.
1Press the 6 buttons to choose DIGITAL
VNR.
2Press the 5 buttons to choose a setting.
AUTO:
The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture.
MIN:
The level of the DIGITAL VNR effect is set to the mini- mum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN.
•The MIN setting is not suitable for
MAX:
The level of the DIGITAL VNR effect is set to the maxi- mum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX.
•The MAX setting is not suitable for
3Press the a button to complete the set- ting.
The menu disappears.
■COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
1Press the 6 buttons to choose COLOUR SYSTEM. Then press the abutton.
The
COLOUR SYSTEM
PAL
BACK
TV OK
2Press the 5 buttons to choose the ap- propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig- nal. Only when you are viewing a picture from Pro- gramme number PR 0 (AV), or EXT terminal, you can choose using the AUTO function.
3Press the a button to complete the set- ting.
The menu disappears.
Note:
•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC 3.58 or NTSC 4.43.
16
