JVC AV29BF10EES manual Program. Programming Menu, TV Config. Configration Menu

Program. (Programming) Menu

Program. (Programming) menu is used to display the pro- gramme names and numbers. You can use this menu to de- lete a channel, to insert a channel and to autostore the pro- grammes.

Select the PROGRAM. menu pressing “ “ or “ ” but- ton and open it pressing “” or “” button. When you enter the programme menu, all the programme numbers and names will be displayed on the screen. The programme number and name of the tuned channel will be shown by the red colour. All the other channel numbers will be black and at first the programme number 01 will be flashing. You can move the

flashing number using “ “ or “” or “” or “” button. As you pass through the programme numbers this way, to reach the programme number you want, the channels correspond- ing to the programme numbers you pass through will not be tuned.

Pressing the RED button will tune the channel on the flashing programme number. Now the colour of the flashing program-

me number will be red. Again you can use ““ or “ ” or “” or “” button to move the flashing number.

352*5￿￿￿￿￿￿￿$=')%370:5￿657/￿￿￿￿￿$5'76(/(&7,16(572￿$0￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$8726725('(/((

To delete a channel from a programme number:

•Move the flashing onto the channel you want to delete.

•Press the YELLOW button. Now the corresponding channel will be deleted and all the other channels below this pro- gramme number will be moved one programme number up.

To insert a channel into a programme number:

•Move the flashing onto the selected channel.

•Press the RED button, so that channel will be displayed on the screen.

•Move the flashing onto the selected programme number. Now pressing the GREEN button will insert the channel on screen displayed into that programme number. If a channel is moved to a lower programme number, channels between the previous and current position of the selected channel will be moved one programme number up and if a channel is moved to a upper programme number, channels between the previous and current position of the selected channel will be moved one programme number down.

AUTOSTORE

If you enter the AUTOSTORE menu, you can automatically programme the received channels in your TV’s programmes with APS ( Automatic programme system ).

1.After displaying the PROGRAM. menu, press the BLUE button to enter the AUTOSTORE menu. The message

“ALL PRESTORED PROGRAMMES WILL BE ERASED ” will appears.

2.If you want to start programming, press “” button. The message “ A.P.S. IS RUNNING PLEASE WAIT ” appears and APS automatically programmes the received channels

in your TV’s programme numbers. Afrer APS is finalized, the PROGRAM. menu appears again.

To cancel APS, press “STANDARD” button.

TV Config. (Configration) Menu

This menu is used to select the Menu language, the Country where you are now located and to select the source of EXT 2 OUTPUT.

•In the Installation menu, Press “ “ or “ ” button to se-

lect TV Config. Then press “” or “” button to enter the “TV Config.” menu.

Selecting Menu Language

•In the “TV Config.” menu select Language and change the

language to the one you desire, using “” or “” button. As soon as you change the language, the menu items will be displayed in the selected language.

Selecting Country

•In the “TV Config.” menu select “Country” using ““ or

“” button. Change the country pressing “” or “” button.

Setting External Source Output

•You can use this menu to select the internal or external source that will be output at EXT 2 terminal.

•In the “TV Config.” menu select “EXT 2 OUTPUT” using

““ or “” button. Then select the source you want to be output at EXT 2 pressing “” or “” button (one of the sources: TV, EXT 1 or F AV (Front AV).

ENGLISH - 8 -