JVC AV32L2EU, AV28L2EU, AV32X10EU, AV28X10EU, AV28WH5EU manual EXT Setting, EXT-1/EXT-3/EXT-4

EXT SETTING

■'8%%,1*

You can choose a signal source to be output from an EXT-2 terminal.

You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.

1Press the ì buttons to choose the arrow from the menu.

EXT SETTING

EXT-1

EXT-3	DUBBING
	EXT-2
EXT-4

TV

BACK

TV OK

D0022-EN

2Press the ë buttons to choose an EXT terminal or TV.

The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT ter- minal passes through the TV and is output from the EXT- 2 terminal.

TV:

The picture and sound of the TV channel you are cur- rently viewing are output from the EXT-2 terminal.

3Press the á button to complete the set- ting.

The menu disappears.

Note:

∙During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 ter- minal.

∙When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a de- vice connected to the EXT terminal onto a VCR con- nected to the EXT-2 terminal.

∙The RGB signals from the TV games cannot be out- put.Teletext programmes cannot be output.

53