Using the TV’s menu

BALANCE

You can adjust the volume balance between the left and right speaker.

2: turn the left speaker’s volume level up.

3: turn the right speaker’s volume level up.

•When HYPER SOUND is on, BALANCE is not displayed in the menu and the balance cannot be adjusted.

„HYPER SOUND

You can enjoy sounds with a wider ambience.

ON:

This function is turned on.

OFF:

This function is turned off. The menu disappears.

•The HYPER SOUND function does not work properly with mono sound.

•You can turn on or off the HYPER SOUND function with a single press. For details, see “HYPER SOUND function” on page 14.

•When HYPER SOUND is on, the balance cannot be adjusted.

„SPEAKER

You can turn off the sound from the TV speakers; but you should only do this if you have connected an audio system to the TV instead of the TV speakers.

ON:

The TV speakers issue sound.

OFF:

The TV speakers do not issue sound.

•The 5buttons of the TV remote control and the r(volume) buttons at the front panel of your TV set can be used to control the volume of each speaker simultaneously.

•Setting the volume of the amplifier too high may damage the front speakers.

EXT SETTING

„y (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and “Additional preparation” on page 34 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that it sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set y(S-VIDEO input) to an EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear.

1Choose an EXT terminal

2Press the yellow button and set the y (S-VIDEO input).

Then press the abutton

An y(S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

22