Using the TV’s menu

2Press the 6buttons to choose an

EXT terminal or TV.

Then press the abutton

The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

•During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.

•When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal.

•The RGB signals from TV games cannot be output.Teletext programmes cannot be output.

FEATURES

„SLEEP TIMER

You can set the TV to automatically turn off after a specified period of time.

1Choose SLEEP TIMER, then press the abutton

A Sub-menu of the SLEEP TIMER function appears.

2Press the 5 buttons to set the period of time.

Then press the abutton

You can set the period of time a maximum of 120 minutes (2 hours) in 10 minute steps.

•One minute before the SLEEP TIMER function turns off the TV, “GOOD NIGHT!” appears.

•The SLEEP TIMER function cannot be used to turn off the TV’s main power.

•When the SLEEP TIMER function is on, you can display the sub-menu of the SLEEP TIMER function again to confirm or change the remaining period of time of the SLEEP TIMER function. Press the abutton to leave the menu after confirming or changing the remaining time.

To cancel the SLEEP TIMER function:

Press the 2button to set a period of time to “OFF”.

24