The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal.
This option adjusts the position when a 480p picture signal is being displayed on the screen.
There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is
slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.
Press the MENU button
π†
To DIGITAL-IN
è To enter
è To select SIZE1 or SIZE2
Press the MENU button to finish
Note:
The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
Digital-In terminal and the picture is being displayed on the screen.
Digital-InInitial Setup
39
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the MENU button
π†
To TV SPEAKER
è
To turn the TV’s speakers ON or OFF
Press the MENU button when finished
Notes:
• Before you turn the TV speaker setting from OFF to
ON, make sure that the TV volume level is low! If
the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV speaker settings will return to “ON”.
TV Speaker65,56,48WP74 English OK1 2/18/03, 1:46 PM39