JVC BR-DV600E Preparation, Turn the power on, Turn the power OFF, Loading/unloading a cassette

4 MENU SWITCHES

4-2 Menu switch details

q: Factory setting (00): The number in the bracket shows the set value on the counter display.

397FAN STOP SHUTDOWN

Details: Sets whether or not VCR operation continues if the fan motor stops.

Setting:

qENABLE (00): The power turns off about 1 minute

after the fan motor stops. DISABLE (01): The VCR continues operation even after the fan motor stops. When the fan motor stops, press the [OPERATE] button as soon as possible to turn the VCR’s power off. If not, a malfunction may occur due to overheating.

502CHARACTER V.POSITION

Details: Moves the display position of the tape counter on screen, etc. vertically.

Setting:

0 (00) The display position can be moved in

q1 (01) 12 steps from 0 to 11. When the No. 504

:<INFORMATION SELECT> menu switch is 11(11) set to “MODE + TIME>, setting to “0” is not

possible.

*The tape remaining time indication position on screen can be changed up and down with this switch.

504 INFORMATION SELECT
Details: Selects which information is displayed on
the on-screen display.
Setting:
TIME (00):	Time data is displayed

5 PREPARATION

Preparing this unit for recording or playback.

CH-1/3								OPERATE
								ON/OFF
				VIDEO CASSETTE RECORDER BR-DV600U				[OPERATE] button
REC LEVEL								EJECT
	MENU		ADVANCE PRESET					[EJECT] button
CH-2/4						REC	PLAY	PAUSE
			SHIFT	SHIFT				REMOTE
	HOLD		SHIFT	A.
	SELECT		SET			REW	STOP	LOCAL
	MONITOR		OUTPUT	COUNTER	MENU			FF
PHONES						S F		MIC
	L	CH-1/2		CTL
	MIX		MIX	TC
	R	CH-3/4		UB
		AUDIO
[AUDIO MONITOR] switch

414TCG SELECT

Details: Selects the time code generator mode. Setting:

qPRESET (00): Engages the Preset mode. REGEN (01): Engages the Regen mode.

415TCG MODE

Details: Selects the time code generator Run mode. Setting:

FREE RUN (00): Engages the Free Run mode. qREC RUN (01): Engages the Rec Run mode.

416NON DROP/DROP (U MODEL)

Details: Selects the time code generator Drop Frame mode.

Setting:

qDROP (00): Engages the Drop Frame

mode. NON DROP (01): Engages the Non-Drop Frame mode.

500ON SCREEN

Details: Selects whether or not the on-screen display is shown on the monitor.

Setting:

OFF (00): The display is not shown. qON (01): The display is shown.

501CHARACTER H.POSITION

Details: Moves the display position of the tape counter on screen, etc. horizontally.

Setting:

q0 (00) The display position can be moved in

:9 steps from 0 to 8. The factory setting is

8 (08)	“0” (the display position at the far right).
	* The tape remaining time indication
	position cannot be changed.

qMODE+TIME (01): Time data and tape running mode are displayed.

505REMAIN ENABLE

Details: Selects whether or not the tape remaining time is shown on the on-screen display.

Setting:

qOFF (00): Remaining time is not shown. ON (01): Remaining time is shown.

514 TIME DISPLAY SELECT
Details: Selects the type of time data displayed.
Setting:
DATE (00):	Shows the date.
CLOCK (01):	Shows the time.
DATE+CLOCK (02): Shows the date and time.

qTC (03):Shows the time code data.

516DISPLAY SELECT

Details: Selects the type of data displayed on the

tape counter in the LCD display.

Setting:

qTC (00): Shows the time code data. CLOCK (01): Shows the date and time. You can

switch between date and time with the [COUNTER] switch.

Turn the power ON.
Press the [OPERATE] switch. The counter display lights
up.
Turn the power OFF
Press the [OPERATE] switch.	“oPF-oFF” is shown in the
counter display.

Loading/unloading a cassette

Insert the cassette into the cassette loading slot with the window facing up. Push the cassette in slowly until the loading mechanism starts automatic loading.

[The VCR enters the Stop mode and the cassette

indicator ( ) lights.

Press the [EJECT] button to eject the cassette.

[The cassette tape is ejected.

Audio monitor selection

Use the [AUDIO MONITOR] switch to select the audio channel to monitor (via the [AUDIO MONITOR OUT] connectors).

20 21