English
EON Function ———————————————————————
With the EON (Enhanced Other Networks) code, the Unit can perform a standby reception which will enable you to obtain desired information which is available from other stations.
“EON” will be displayed while receiving stations with an EON code. EON Standby reception is applicable for preset stations only.
You can set EON Standby reception regardless of types of receiving bands.
SHIFT
PTY/EON
SELECT +
SELECT –
PTY/EON
3
or
PTY/EON
8
SET
4 5
or
– SELECT +
8
or
SET
Setting EON Standby reception
1.Press the PTY/EON button twice.
•When using the Remote Control, press the 3 PTY/EON button after pressing the SHIFT button then press the 8 SET button.
The last EON information type selected is displayed.
2.Select information you want by pressing the SELECT + or SELECT – button.
• When using the Remote Control, press the 5 SELECT + or 4 SELECT – button.
TA: | Identifies that a traffic announcement is being broadcast in your area. |
NEWS: | News |
INFO: | Programmes on medical service, weather forecast, etc. |
•With each pressing of the button, indications will change as follows:
SELECT + =
ï TAï NEWS ï INFO ï OFF ï
+SELECT –
3.Press the PTY/EON button.
•When using the Remote Control, press the 8 SET button.
As soon as your selection is entered the Unit will go into EON Standby reception mode.
If you want to cancel the EON function, select “OFF” by folowing the steps above.
When this Unit carries out EON Standby reception, the indication will change as follows:
1.Waiting for EON Standby reception.
MHz
TA NEWS INFO EON
ST
2.Preset stations are being searched for and while preparing to change the station, sound will be muted.
3.The station will be changed and the Station name being received will appear on the display.
MHz
TA NEWS INFO EON
ST
Light up
Station name
TA NEWS INFO EON
ST
Blinking
•When using the DISPLAY MODE button to change the display, use the appropriate setting for the type of display.
14
