PICTURE SOURCE

You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source).

Select one of the following:

AUTO: Normally select this.

When playing back a disc containing both video and film sources, the System automatically changes the processing to match it to the picture type (film or video source) of the current chapter.

FILM: To play a film source disc.

VIDEO: To play a video source disc.

SCREEN SAVER

You can activate or deactivate screen saver while operating the built-in disc player.

Select one of the following:

ON: The pictures on the TV becomes dark when no operation is done for about 5 minutes.

OFF: To cancel the screen saver.

FILE TYPE

If both audio tracks (MP3 or WMA files) and still picture (JPEG files) are recorded on a disc, you can select which to play.

Select one of the following:

AUDIO:To play MP3/WMA files.

STILL PICTURE: To play JPEG files.

7 AUDIO Set up Menu

INFO

You can adjust the sound settings of the System.

AU DI O

 

DIGITAL AUDIO OUTPUT

STREAM/PCM

 

 

DOWN MIX

 

DOLBY SURROUND

 

 

D. RANGE COMPRESSION AUTO

 

 

 

 

 

 

 

 

 

 

 

 

SELECT

USE

TO SELECT. USE ENTER TO CONFIRM

 

ENTER

TO EXIT, PRESS [ SET UP ] .

 

 

 

 

 

DIGITAL AUDIO OUTPUT

When using the digital output terminal on the rear, set this correctly according to the connected component.

Select one of the following:

PCM ONLY: To connect to a linear PCM digital equipment such as an MD recorder.

DOLBYDIGITAL To connect to a Dolby Digital decoder

/PCM:or an amplifier with a built-in Dolby

Digital decoder.

STREAM/PCM: To connect to a DTS decoder or an amplifier with a built-in DTS decoder.

•See also “OPTICAL DIGITAL OUTPUT Signals” on page 54.

DOWN MIX

When playing a multi-channel DVD, the System converts the signals into 2 channels.

Downmix setting is effective for the speaker output (and digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM ONLY”) from this System.

Select one of the following:

DOLBY To connect an amplifier with the Dolby SURROUND: Pro Logic decoder.

STEREO: To connect a conventional stereo amplifier, receiver, MD player, TV, etc.

42