To assemble the AM loop antenna
To connect the AM loop antenna cords
1 Hold | 3 Release |
|
2Insert
•If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.
•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor condition.
To connect the speaker cords
1 Hold | 3 Release |
2 Insert
From right | From left |
speaker | speaker |
From | From |
right Subwoofer | left Subwoofer |
•When connecting the speaker cords, match the polarity of the speaker terminals: (+) to (+) and
| Speaker | Terminal color | |
|
| |
| (+) | |
|
|
|
Main speakers | Blue | Black |
Subwoofers | Red | Black |
|
|
|
• Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
• DO NOT connect more than one speaker to each terminal.
• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.
6