To connect digital audio

OPTICAL

DIGITAL

OUTPUT

Before connecting optical digital cord, remove the protective cap from the OPTICAL DIGITAL OUTPUT terminal.

To connect other equipment

By using an stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as an MD player, a TV, etc.

Stereo mini plug cord (not supplied)

AUX

Portable audio device,

Game, etc.

(front panel)

If the audio output on the other equipment is not stereo mini plug type, use a plug adapter to convert the stereo mini

plug to the corresponding plug of the audio output.

IMPORTANT

Always set volume to MIN when connecting or disconnecting the other equipment.

DO NOT plug in any equipment until all connections are complete.

Selecting the Video Signal

When connecting a TV, you can use either one of the video output terminals—COMPONENT or AV OUT.

After connecting the TV, set the video signal type correctly for your TV.

•Make sure the unit is not yet turned on. If it is already turned on, turn off then on again so that the selector setting becomes active.

VIDEO OUT

SELECT

Y/C

RGB

Y/C Select for sending S-Video signals through the AV OUT terminal or for sending component video signals through the COMPONENT jacks.

RGB Select for sending the composite video signals or RGB signals through the AV OUT terminal.

7