To erase the
A-B Repeat
1While playing, display the 2Select OFF .
3Display the
DISC 2 | TITLE 2 | CHAP 3 | TOTAL 1:01:58 | ||
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
OFF
4 SelectDISC 2 | TITLE 2 | CHAP 3 | TOTAL 1:01:58 | ||
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
|
|
|
|
|
DISC 2 | TITLE 2 | ||
TIME | A- | CHAP. | 1/3 |
Time Search
You can move to a particular point by specifying the elapsed playing time from the beginning.
1While playing (without PBC for SVCD/VCD), display the
•Except for DVD: Time Search can be used before starting playback.
2Select .3Display the
DISC 2 | TITLE 2 | CHAP 3 | TOTAL 1:01:58 | ||
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
| TIME | _ : _ _ : _ _ |
|
|
You can specify the time in hours/minutes/seconds.
Examples:
To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.
To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.
•It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).
•To correct a misentry, press cursor 2 to erase the last entry.
5 Finish the setting.
The System starts playing from the specified time.
6 Select the end point (B). | To erase the |
| |
|
portion plays repeatedly.
Before pressing ENTER, you can search for the end point using ¡.
33