Presetting Automatic DVD Video Sound
Increase Level
The DVD Video sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD Video, so you do not have to adjust the volume when you change the source.
As the number increases, sound level also increases.
Changing the Picture Tone ONLY | INFO |
Remote |
|
While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own taste.
To select a preset picture tone
1While playing, display VFP setting screen.
| NORMAL |
|
| GAMMA | 0 |
| BRIGHTNESS | 0 |
| CONTRAST | 0 |
| SATURATION | 0 |
| TINT | 0 |
| SHARPNESS | 0 |
(holding then...) | On the TV screen |
| NORMAL | CINEMA |
| USER2 | USER1 |
NORMAL | Normally select this. |
|
CINEMA | Suitable for a movie source. |
USER1/USER2 You can adjust parameters and can store the settings (see below).
GAMMA | Adjust if the neutral color is bright |
| or dark |
|
|
BRIGHTNESS | Adjust if the picture is bright or |
| dark as a whole |
|
|
CONTRAST | Adjust if the far and near positions |
| are unnatural |
|
|
SATURATION | Adjust if the picture is whitish or |
| blackish |
|
|
TINT | Adjust if the human skin color is |
| unnatural |
|
|
SHARPNESS | Adjust if the picture is indistinct |
| |
|
|
To erase the screen, while holding down SHIFT, press VFP again. The screen will automatically be erased after 9 seconds even if you do not press VFP.
Changing the Display Brightness Remote
ONLY
You can dim the display window.
To adjust the picture tone | DIMMER ON | |
DIMMER OFF | ||
1 Select “USER1” or “USER2.” | ||
(Normal) |
• Follow steps 1 and 2 explained above.
14