|
| EN 11 |
|
| Shoulder Strap Attachment |
|
| ATTACH STRAP |
| 2 | Following the illustration at left, thread the strap |
3 | 1 | 1 through the top of the eyelet 1, then fold it back |
2 | and thread it through the keeper 2, and then | |
| 1 | through the buckle 3. Repeat the procedure to |
| attach the other end of the strap to the other eyelet | |
|
| |
4 |
| 4, making sure the strap isn’t twisted. |
| ADJUST LENGTH | |
|
| |
|
| Adjust as shown in the illustration at left 1, then |
|
| 2 slide both keepers snug against the eyelets to |
|
| prevent slipping 2. |
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a
