JVC Compact VHS instruction manual Fader, Advanced Features, Wide

20EN

Fade-in

RECORDING

Fader

AdvancedFeatures(cont.)

Fade-out

Viewfinder

This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade- out works at recording end or when you enter Record- Standby mode.

ENGAGE FADE-STANDBY MODE

1 Press EFFECT to engage the Fade-Standby mode.

4EFFECT

FADER

After 2 sec.

•“ BK FADER” is displayed for approx. 2 seconds. Then “FADER” disappears, and only “ BK ” remains.

START OR END RECORDING

2 Press Recording Start/Stop Button to activate fade-in or fade-out.

TO CANCEL FADE-STANDBY MODE

3 While “ BK ” is displayed, press EFFECT.

•“OFF” is displayed for approx. 2 seconds and the fade-standby mode is cancelled.

NOTES:

EFFECT

WIDE

Recording

Start/Stop

Button

Viewfinder

●Pressing and holding the Recording Start/Stop Button allows you to record a black blank screen.

●The screen becomes slightly reddish when the Fader is used with Sepia (☞ pg. 19).

●With the Electronic fog filter mode (☞ pg. 19) engaged, the image fades in/out to a white screen.

Wide

This feature allows you to record black bars at the top and bottom of the screen to produce a cinema-like “wide-screen” effect.

ENGAGE WIDE MODE

1 Press WIDE.

•To restore normal screen, press WIDE again.

Wide mode

NOTE (for Fader, Wide, Super LoLux, and Instant Titles) :

When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings (Fade-standby : “OFF”, Wide mode : off, Super LoLux : “MAX”, Instant Titles : off). Then when the Select Dial is returned to any position except AUTO LOCK, the above functions return to the settings you selected before turning it to AUTO LOCK. However, if the function is switched during AUTO LOCK, the selected mode will be set and will remain unchanged even when the Select Dial is turned to any position except AUTO LOCK.