JVC DD868EU Preset Download

6 EN

INITIAL SETTINGS (cont.)

PresetDownload

When you connect the recorder and your TV via fully-wired

21-pin SCART cable (Z pg. 3), you can set the recorder's tuner

channels by downloading preset data from your TV instead of

using the Auto Set Up function (Z pg. 4). After downloading is

completed, the recorder sets the clock and Guide Program

number automatically. For details, refer to the instruction

manual for your TV.

PERFORM PRESET DOWNLOAD

Press OK.

If you are referring to the front display panel

Press %ﬁ to select "CH – –" and press OK or

If you are referring to the on-screen display

Press %ﬁ to move the

highlight bar (pointer) to

"T-V LINK" and press OK

Preset position on the display panel increases from

"CH1"; do NOT press any button on the recorder or

remote control until the display panel shows either

the display as illustrated on page 7 or "– –:– –".

●If "– –:– –" appears on the display panel, refer to page

●If you are using the on-

screen display, the T-V

LINK screen will appear.

Then the GUIDE PROG

SET screen will appear

during Guide Program

number set.

●If you press any button

on the recorder or

remote control while

downloading is in

progress, it will be

interrupted.

SET VIDEO CHANNEL

Set the Video Channel to off manually. (Z pg. 55)

NOTES:

●

In the area where no TV station transmits a PDC signal, the

recorder can perform neither auto clock set nor auto Guide

Program number set.

●

If there is a power cut, or if you press or MENU while

downloading or set up is in progress, it will be interrupted; be

sure to turn off the recorder power once and try again from the

beginning.

●

Auto clock may not function properly depending on the

reception condition.

●

When you perform T-V LINK function, be sure to use fully-

wired 21-pin SCART cable.

●

On this recorder, the characters available for station’s name

(ID) are A–Z, 0–9, –, *, + and (space). Some downloaded

station’s name may differ from those of your TV (

pg. 52).

Perform steps 1 to 3 of "Auto Set Up" on page 4 and 5 before

continuing.

You can use this function only with the TV offering

T-V Link, etc.*

* Compatible with TVs offering T-V Link, EasyLink, Megalogic,

SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully-

wired 21-pin SCART cable. The degree of compatibility and

available functions may differ by system.

T-V LINK

PLEASE WAIT

[MENU] : EXIT

GUIDE PROG SET

PLEASE WAIT

[MENU] : EXIT

AUTO SET

T-V LINK

[5∞] =

[MENU] : EXIT

123

456

789

– –:– –

