JVC DLA-RS1 manual How to Use the Remote Control, Loading Batteries, Getting Started, Preparation

DLA-RS1_EN.book Page 13 Wednesday, January 24, 2007 9:23 AM

ENGLISH

How to Use the Remote Control

Loading Batteries

zIf the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries. Insert the batteries according to the +- marks.

zBe sure to insert the - end first.

zIf an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and operate the remote control.

Effective Range of Remote Control Unit

„When directing the remote control

Getting Started

Preparation

Basic Operation

toward this unit

This unit

zWhen aiming the remote control towards the remote sensor on this unit, ensure that the distance to the sensor in front or at the rear of this unit is within 7 m.

zIf the remote control fails to work properly, move closer to this unit.

Remote Control

„When reflecting off a screen

zEnsure that total of distance A between this unit and screen and distance B between remote control and screen is within 7 m.

zAs the efficiency of signals reflected from the

remote control unit differ with the type of
screen used, operable distance may	This unit
decrease.

Screen

Remote Control

Settings

Troubleshooting

Others

13