Recording

One-touch Timer Recording

VideoVR

DVD-RW DVD-RW DVD-R

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc has enough recordable space for the time you set.

After finishing the recording, the recorder automatically goes into standby.

1

Turn on the unit and load a recordable disc.

Make sure that the TV input is set on the unit.

This operation may take a while to be recognized.

2

Using [REC SPEED], select a recording speed.

Refer to “Recording speed” on page 26.

3

Make sure that the recording format is set to the desired mode.

Refer to “Formatting a disc” on pages 28-29.

When a DVD-RW disc is loaded:

You can choose Video mode or VR mode from the Setting menu. “Video mode” has been selected as the default. Refer to page 28 “Choosing the recording format of a blank disc.”

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

4

Using [CH + / -] or the Number buttons, select a desired channel to record.

5

Press [REC I] repeatedly to select a desired recording time.

Recording time appears on the TV screen (30 minutes to 4 hours). Recording will start.

I0:30

0:30

OFF 1:00

(Normal Recording)

4:00 3:30

When the unit reaches the specified time, it will turn off automati- cally.

To change the recording time during the one-touch Timer Recording, press [REC I] repeatedly until the desired time appear.

To cancel the one-touch Timer Recording within the specified time, press [STOP C].

This operation may take a while to be completed.

 

OPEN/

 

 

STANDBY/ON

 

CLOSE

ON SCREEN SET UP

 

 

.@/:

ABC

DEF

REPEAT

 

1

2

3

 

 

GHI

JKL

MNO

ZOOM

 

4

5

6

 

 

PQRS

TUV

WXYZ

CH

 

7

8

9

4

 

CLEAR

0

AUDIO

 

 

 

 

 

PROG

 

 

 

 

VCR Plus+

 

 

 

TOP MENU

MENU/LIST

 

 

ENTER

 

 

 

 

 

RETURN

 

SLOW

PLAY

SLOW

5

REC

STOP

PAUSE

REC

REC

 

 

SPEED

MONITOR

 

 

2

Note

•The remaining recording time will appear on the display panel during an one-touch Timer Recording. Press [ON SCREEN] to see it on the TV screen.

•You cannot pause a one-touch Timer Recording.

•Unlike a Timer Recording, you can perform the following operations during a one-touch Timer Recording.

-Turning off the power.

-Using [REC I] and [STOP C].

•The unit will be turned off automatically under the follow- ing conditions.

1)No space remained on the disc. 2)When a power failure occurs.

•When OTR is finished and the power is turned off, the unit will switch to the standby mode automatically if a Timer Recording has been pro- grammed.

Press [STANDBY/ON y/I] to cancel the standby mode for using the unit continuously.

32EN