JVC DR-M70SU Audio setting (cont’d), Using, Digital Out, ting. Press [ENTER], • Using [K / L], select a set, Using [K / L], select “Playback”. Press [ENTER]

Changing the Setting menu

Audio setting (cont’d)

2

Using [K / L], select “Advanced Setting Menu”. Press [ENTER].

Advanced Setting Menu will appear.

3

Using [K / L], select “Playback”. Press [ENTER].

Option window will appear.

4

Using [K / L], select a desired item. Press [ENTER].

PROG

VCR Plus+			2
TOP MENU	ENTER	MENU/LIST	3
		RETURN	4

Note

• Dynamic Range Control

is available only on the

discs which are recorded

in Dolby Digital format.

Digital Out

Set the digital audio output.

Playback

TV Aspect	4:3 Letter Box
Parental Lock	All
Disc Menu Language	English
Audio Language	Original
Subtitle Language	OFF
Digital Out
Dynamic Range Control	ON
Fast Forward with Audio	ON
Progressive	OFF

Digital Out

PCM	48kHz
Dolby Digital	Stream
DTS	ON

• Using [K / L], select a set-

ting. Press [ENTER].

Option window will appear. Proceed to steps A, B or C.

A Settings for PCM (Default : 48kHz)

Digital Out - PCM

48kHz 96kHz

•Using [K / L], select a setting. Press [ENTER].

Your setting will be activated.

48kHz	: If your amplifier/decoder is NOT com-
	patible with 96kHz PCM, select “48kHz”.
	96kHz sound will be output in 48kHz.
96kHz	: If your amplifier/decoder is compatible
	with 96kHz PCM, select “96kHz”. 96kHz
	sound will be output.

Note

When playing back disc with copyright protection

•Even if you select “96kHz”, the sound will be down sampled at 48kHz.

B Settings for Dolby Digital (Default : Stream)

Digital Out - Dolby Digital

PCM

Stream

•Using [K / L], select a setting. Press [ENTER].

Your setting will be activated.

PCM : Convert the Dolby Digital into PCM (2 channel).

When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”.

Stream : Outputs Dolby Digital signals.

When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”.

Note

When playing back a DVD-RW disc recorded in VR mode

•If the audio on a disc is recorded in Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main (L), sub audio (R), or a mix of both (L/R) with your amplifier/decoder.

C Settings for DTS (Default : ON)

Digital Out - DTS

ON

OFF

•Select a setting using [K / L], then press [ENTER].

Your setting will be activated. ON : Outputs DTS signals.

When your amplifier/decoder is compatible with DTS, set to “ON”. OFF : No DTS signal is output.

When your amplifier/decoder is NOT compatible with DTS, set to “OFF”.

76EN