JVC DR-MH300BEK, DR-MH300SEK F Exit setup, F / G Turn off this unit, E Set up the external receiver, Download programme data before using the GUIDE Plus+ system

If using an external receiverE Set up the external receiver.ASelect AExternal Receiver 1B.

SELECT

External Receiver 1 None

CONFIRM

BCheck the message screen.

CONFIRM

CSelect and confirm on the type of reception.

0Select ACableB, ASatelliteB or ATerrestrialB.

SELECT

Terrestrial

CONFIRM

DSelect and confirm on the provider.ESelect and confirm on the brand.FSelect and confirm on the socket.

0Specify the terminal connected to the external receiver.

GAfter the message is displayed, check and confirm on the connection.

0The control signals are transmitted to the external receiver in the test.

HConfirm the completion message.

CONFIRM

0Returns to the ASetupB screen.

Set up a second or third external receiver if necessary.

F Exit setup.

Proceed to step G.

Download programme data before using the GUIDE Plus+ systemF / G Turn off this unit.

0	It takes about 24 hours to download sufficient data.	Preparations
0	If the unit is turned on while downloading, the
	download will be cancelled.
0	The programme listing data download is given
	priority from 03:00 to 04:30, and VPS/PDC recording
	cannot be performed properly. Set AVPS/PDCB to
	AOFFB if performing timer recording at this time.

0AEPGB is displayed on the front display panel during downloading.

0If you are using an external receiver, leave it on and tune to your Host Channel. AHost Channel ListB

[ P33]

If your external receiver is not in the list (Alternate Setup)

Operate from step E.

A Select and confirm on ANoneB for the brand setting.

B Exit setup.

C Tune the external receiver’s channel to the host channel.

0 Refer to AHost Channel ListB [ P33].

D Leave the external receiver on.

E Turn off this unit, and wait for one night.

The GUIDE Plus+ system will be automatically updated. As new receivers will be added, search for your receiver and complete the settings.

In order to use the programme listing, you need to download the programme data using the new settings. Turn off this unit, and wait for one more night.

EN I 31