Breville 800JEXL manual PAgeTroubleshootingheader

PAgeTroubleshootingheader.....

Possible problem	Easy solution
Machine will not work	The Safety Locking Arm may not be correctly engaged in the
when turned ON.	vertical operating position with the locking arm located into
	the two grooves on either side of the Juicer Cover
Motor appears to stall	Wet pulp can build up under the juicer cover if the juicing
when juicing.	action is too vigorous. Try slower juicing action by pushing
	the food pusher down slower. Follow Disassembling and
	Cleaning instructions and clean the filter bowl surround, the
	stainless steel filter basket and the juicer cover.
	Hard fruit and vegetables will put excess strain onto the
	motor if a low speed is selected. Please refer to the juicing
	guide to determine the correct speed for the fruit and
	vegetables selected for juicing.
Excess pulp building	Stop the juicing process and follow Disassembling
up in the Stainless	instructions. Remove the juicer cover, remove pulp,
Steel Filter Basket.	reassemble and begin juicing again. Try alternating soft and
	hard vegetables and fruit varieties
Pulp too wet and	Try a slower juicing action. Remove the Nutri Disc™ and
reduced	thoroughly clean mesh walls with a cleaning brush. Rinse
extracted juice.	the filter basket under hot water. If the fine mesh holes are
	blocked, soak the basket in a solution of hot water with 10%
	lemon juice to unlock the holes or wash in the dishwasher.
	This will remove excess fiber build up (from fruit and
	vegetables) which could be inhibiting the flow.
Juice leaks between	Try a slower juicing speed and push the food pusher down
the rim of the Juicer	the feed chute slower.
Cover and the juicer.
The unit will not turn	Check the Overload Protection Button on the bottom of the
on.	Motor Base to insure the safety device has not been activated
	automatically.

20