Breville 800JEXL manual PAgeOperatinghe deryour..... Breville Juice Fountain Elite, Hint

PAgeOperatinghe deryour..... Breville Juice Fountain™ Elite

1.Wash your selection of fruit and vegetables ready for juicing.

NOTE

Most fruit and vegetables such as apples, carrots and cucumbers will not need to be cut to size as these will fit into the feed chute whole. When juicing carrots place the tip of the carrot into the feed chute last.

2.Ensure the Juice Fountain™ Elite is correctly assembled. Ensure the Stainless Steel Filter is thoroughly cleaned before each use. Ensure you place the Juice Jug under spout before commencing juicing.

3.Plug the power cord into a 110 or 120V power outlet. Flip the two-speed switch either up for low speed or down for high speed depending on the type of fruit or vegetable being juiced and the unit will automatically start. Use the speed selector table as a guide for juicing different fruits and vegetables.

4.With the motor running, place food into the Feed Chute. Using the Food Pusher, gently guide food down the Feed Chute. To extract the maximum amount of juice, always push the Food Pusher down slowly.

5.Juice will flow into the Juice Jug and the separated pulp will accumulate in the Pulp Container.

WARNING

Never use fingers to push food down the feed chute or clear the feed chute. Always use food pusher provided.

NOTE

The Pulp Container can be emptied during juicing by turning the Juicer OFF and then carefully removing the Pulp Container. (Replace empty Pulp Container before continuing to juice). Do not allow the Pulp Container to overfill as this may prevent correct operation or damage the unit.

HINT

To minimize clean up, place a produce bag into the Pulp Container to collect the pulp.

Overload Protection Button

The Breville Juice Fountain™ Elite is fitted with a safety device which safeguards against overheating with excessive loads. If this occurs, the Juice Fountain™ Elite will automatically activate the overload protection button and the unit will turn itself off. If this occurs unplug the Juicer from the power outlet and allow the unit to cool. Then press the Overload Protection Button found on the bottom of the Motor Base. The safety device will then be reset and the Juice Fountain™ Elite is ready for use again.

12