JVC DR-MH300BEK, DR-MH300SEK Auto Setup (continued), If auto setup was successful, If auto setup was unsuccessful, [ P52], [ P37], [ P36]

Auto Setup (continued)

If auto setup was successful If auto setup was unsuccessful

The channel and correct time will be displayed on the front display panel.

0If VIDEO Plus+ timer programming is performed, the

guide programme number can be verified.

See AVIDEO Plus+ Timer ProgrammingB [ P52].

IMPORTANT:

........................................................

0After auto setup, check the channels that were set. If

the same broadcast station was set to multiple channels, delete the ones with poor reception. See ADeleting a channelB [ P37]. If the same broadcast station was set to multiple channels, the programme listing may not be displayed properly.

The clock display on the front display panel will be A- - : - -B. The channel may also not be displayed.

0Check the antenna cable connection, switch off the power, then perform auto setup all over again.

0Set channels manually for broadcast stations with

poor reception.

See ASetting Receiving ChannelsB [ P36].

If you have any difficulty with the above procedures call the JVC Customer Service Hot Line on 0870 330 5000.

26H EN