Zanussi ZOB 590 manual are flashing automatically, Press the, short time, is wrong“, Demo mode

electrolux 55

Demo mode

This mode is intended to be used in shops to demonstrate the oven functionality without any power consumption except the interior light, the display and the fan. This function can only be switched on when the appliance is first connected.

If there is a power failure, when the power supply is restored again, the Demo function can only be switched on if in the display 12:00 and the symbol

are flashing automatically.

1.	Press the	button for approximately 2
	seconds. An acoustic alarm will sound for a
	short time.
2.	Press the	and “	”buttons at the same
	time. A short acoustic		alarm will be heard
	and the time 12:00 will appear in the display
	(Fig. 19).

When the oven is switched on the symbol appears in the display.This means that the Demo function is activated.

All oven functions can be selected.

The oven is not really working and the heating elements do not switch on.

Switch off the oven and follow the procedure described above to switch off the demo mode again.

The Demo function remains saved in the programme in the event of a power failure.

B

Fig. 19

Error code

The electronic programmer does a continuous
diagnostic check of the system. If some parameters
are not correct, the control unit will stop the
activated functions and it will show on the display
the corresponding error code (Fig. 20).	Fig. 20
For further details, refer to chapter "If something
is wrong“.

55