JVC DLA-M2000LU Menu Transition Diagram in PC Menu Mode, Quick Reference Guide for PC Menu Mode

Resize:

Tracking:

Menu Operations

■Menu Transition Diagram in PC Menu Mode

Main menu in Video Menu Mode Submenus in Video Menu Mode

Menu Operations

■Quick Reference Guide for PC Menu Mode

Main Menu in PC Menu Mode (While receiving computer-related signals)

Image adj. → (Refer to page 47)

Press 5/∞ to select an item.

Menu
Image adj.	Brightness
Setting	Contrast
Color temp.	Sharpness
Options	All reset
Language
Information

		Press 2/3 to select Yes or No.
Press 5/∞ to select an item.		Then, press ENTER to execute.
Press 2/3 to set or adjust the value.			Image adj.
3 or	ESCAPE		All reset?
Image adj.
ENTER
Brightness	12
Contrast	ENTER		Yes	No
	12
ESCAPE Sharpness	1 2 3 4 5
All reset	ENTER

Brightness:	Brightness of the picture image being projected can be adjusted. (–30 to +30, 0*)
Contrast:	Contrast of the picture image being projected can be adjusted. (–30 to +30, 0*)
Sharpness:	Adjust the outline of letters etc. (1 / 2 / 3 / 4 / 5, 3*)
All reset:	Resets above items to the factory set values.

Yes / No

Setting

The lateral size and display area of picture image can be adjusted. (–128 to +127)

→(Refer to page 46)

No.51781

5

Menu

Image adj.

Setting

Color temp.

Options

Language

Information

Menu

Image adj.

Setting

Color temp.

Options

Language

Information

Menu

Image adj.

Setting

Color temp.

Options

Language

Information

5 ∞

Tracking

Phase

Position

Resize

Clamp

5 ∞

R-Gain

G-Gain

B-Gain

All reset

5 ∞

Menu display Line display Keystone PC2 (BNC) Right Left rev. Top Bottom inv. RS-232C Sleep time

	Press ENTER to select an item.
	Press 5/∞ / 2/3 to move the
Press 5/∞ to select an item.	video screen/menu position.

Press 2/3 to set or adjust the value.						Position
	Setting
3 or	Tracking	123
ENTER					ENTER
	Phase	12				Disp.Posi.	Menu
	Position	ENTER			ESCAPE	12,12	ENTER
ESCAPE Resize		1:1	Panel	Aspect
	Clamp	ST	FP	BP
					Press 2/3 to select Yes or No.
Press 5/∞ to select an item.					Then, press ENTER to execute.
Press 2/3 to set or adjust the value.						Color temp.
	Color temp.
3 or	Color temp.	Low	Middle	High		All reset?
ENTER					ESCAPE
	R-Gain	123
	G-Gain	123				Yes	No
ESCAPE B-Gain		123
	All reset	ENTER			ENTER
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value. Keystone						0
3 or	Options 1				ENTER
ENTER	Menu display		15sec	ON
	Line display		5sec	OFF	ESCAPE
	Keystone	ENTER
ESCAPE PC2 (BNC)			RGB YPBPR
	Options 2	ENTER

Phase:		Flickering or dim picture image can be adjusted. (0 to 31) →	(Refer to page 46)
	Position:	Video screen position and menu position can be adjusted. →	(Refer to page 49)
		Disp. Posi. / Menu

The relationship between the number of pixels (resolution) and the screen can be selected.

→(Refer to page 51)

				“1:1”:	Picture image is projected with its original size.
				Panel:	Picture image is enlarged to the full size.
				Aspect*:	Picture image is enlarged while maintaining the original aspect ratio.
		Clamp		Selectable clamp position. Normally, set to “BP”. ST / FP / BP*
Color temp.
	Color temp.			Adjustable color temperature, Low/Middle* /High.
				Will be adjusted to correct reddish or blueish image.
	R-Gain			Adjusts the red level. (o to 255, the adjustable range varies depending on signals)
	G-Gain			Adjusts the green level. (o to 255, the adjustable range varies depending on signals)
	B-Gain			Adjusts the blue level. (o to 255, the adjustable range varies depending on signals)
	All-reset			Reset above items to the factory set values.
			Yes/No
Options → (Refer to page 52)
Options 1
	Menu display: 15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
	Line display:			5sec* (Line display such as “PC1” or “PC2” appears on top right of the screen for 5 seconds
				when the VIDEO or PC button is pressed.) / OFF (Line display does not appear.)
	Keystone:			Press ENTER to enter the Keystone submenu.
			Keystone:		Adjust to correct the trapezoidal distortion of the projected image.
					(–80 to +128, 0*)
	PC2 (BNC):			RGB* or YPBPR. Set to RGB when a computer device with analog RGB, V, H/Cs signals is
				connected to the PC2 terminals. Set to YPBPR when a device with component signals (Y, B-
				Y, R-Y) or DTV-format signals (Y, PB, PR) are connected to the PC2 terminals.
	Options 2:			Press ENTER to enter the “Option 2” submenu.

DEUTSH ENGLISH

∞

Menu

Image adj.

Setting

Color temp.

Options

Language

Information

5 ∞

English

Deutsch

EspaÒ ol

Italiano

FranÁ ais

Press 5/∞ to	ENTER
select an item.
Language

English

Deutsch

EspaÒ ol

Italiano

FranÁ ais

ENTER

Options 2

Right Left rev.	OFF	ON
Top Bottom inv.	OFF	ON
RS-232C [bps]	9600	19200
Sleep time [min]	15 30 60	OFF
Options 1	ENTER

		Right Left rev.:	OFF* / ON (Select for upside-down hanging on the ceiling.)
		Top Bottom inv.:	OFF* / ON (Select for upside-down hanging on the ceiling.)
		RS-232C [bps]:	Selectable baud rate (transmission speed). 9600 / 19200*
		Sleep time [min:]	Selectable sleep times. If no-signal condition continues for the period
			of selected time (Unite: Minutes), the projector enters the stand-by
			mode. 15 / 30 / 60 / OFF*
		Options 1:	Press ENTER to return to the “Option 1” submenu.
Language		Language for on-screen display. → (Refer to page 45)
	Japanese / English* / German / Spanish / Italian / French

FRANÇ AIS

Menu

5 ∞

Press 5/∞ to select an item.

Press 2/3 to set or adjust the value.

Note

Information → (Refer to page 52)
	Input:	Shows the terminal name selected by the PC button. (PC1or PC2)
	Switcher:	This display currently has no meaning. (“CH.0” is usually displayed to indicate that it is not being used.)
	Resolution:	Shows the resolution of the input signal being received. (Horizontal ⋅ Vertical)

ITALIANO

Image adj.	Input	PC 1
Setting	Switcher	CH.0
Color temp.	Resolution 1280 1024
Options	Frequency H	79.9	kHz
Language	Frequency V	75	Hz
Information	Lamp time	123	h

•The display languages of the menus are set to “English” when the projector is bought. The display language can be selected from the following 6

languages: (Japanese)”, “English (English)”, “Deutsch (German)”, “Espanol (Spanish)”, “Italiano (Italian)” and “Francais (French)”. (Refer to page 45.)

The language settings in the section are explained in “English”.

You can see the information.

	It may not be displayed correctly with some input signals.
Frequency H:	Shows the horizontal frequency of the input signal being received. ( kHz)
Frequency V:	Shows the vertical frequency of the input signal being received. ( Hz)
Lamp time:	Accumulated used hours of the light-source lamp.

* : Factory set value.

ESPAÑ OL

DLA- DLA-

1-25 40

41

M2000LU M2000LE