JVC DLA-M2000LU manual Adjusting Tracking / Phase, Adjusting Picture Quality

1-28

Menu Operations

Adjusting Tracking / Phase

Normally, tracking and phase adjustments are automatically carried out when a video signal is input to the projector for the first time, or when the QUICK ALIGN. button on the remote control is pressed.

However, you can manually adjust the tracking and phase on the menu.

Both tracking and phase can be adjusted in PC menu mode. In Video menu mode, only tracking is adjustable, though this adjustment is not normally required.

If a wide stripe appears on the screen, adjust the lateral size of the picture image and the display area (tracking adjustment) so the stripe disappears.

Menu Operations

Adjusting Picture Quality

In the “Image adj.” submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the adjustment items differ in Video menu mode and PC menu mode.

1Press the MENU button.

The main menu appears on the screen.

2Select “Image adj.” with the cursor button 5 or ∞, and press 3 or the ENTER button.

DLA-M2000LU DLA-M2000LE

Also, if text projected on the screen appears flickers or appears dim, adjust phase adjustment so it becomes clear.

1Press the MENU button.

The main menu appears on the screen.

2Select “Setting” with the cursor button 5 or ∞, and press 3 or the ENTER button.

The “Setting 1” (video mode) or “Setting” submenu appears on the screen.

In video mode:Select setting 2 with the cursor ∞ or 5, and press ENTER button.

The “Setting 2” submenu appears on the screen.

Video submenu PC submenu

The “Image adj.” submenu appears on the screen.

Video submenu

Image adj.

Brightness 12

Contrast 12

Sharpness 1

Color12

Tint12

PC submenu

Image adj.

Brightness	12
Contrast	12
Sharpness	1	2	3	4	5
All reset	ENTER

Setting 1			Setting 2
Position	ENTER		Tracking	123
Tone	TV	Cinema	Screen	4:3	16:9
Aspect change	4:3	16:9	HDTV	1030i	1035i
Decoder	ENTER		Setting 1	ENTER
Setting 2	ENTER

Decoder is only displayed when there is a signal for the AV IN terminal.

Setting

Tracking	123
Phase	12
Position	ENTER
Resize	1:1	Panel	Aspect
Clamp	ST	FP	BP

All reset ENTER

3Select the item to be adjusted with the cursor button 5 or ∞.

*“Color” and “Tint” are shown in Video submenu only.

4Make adjustment with the cursor 2 or 3.

*To adjust multiple items, repeat 3 and 4.

No.51781

3Select “Tracking” or “Phase” with the cursor button 5 or ∞.

*“Phase” is shown only in PC submenu.

4Adjust the tracking or phase with the cursor 2 or 3.

Adjust the tracking and phase of the picture image being projected. To adjust the phase, first check for correct tracking adjustment.

*To adjust multiple items, repeat 3 and 4.

Adjustment item	Button	Adjustment content
Tracking	2 or 3	The picture image shrinks laterally (right-to-left) or extends laterally (left-to-
		right). (–128 ↔ +127)
Phase	2 or 3	Set to a position where text appears clear. (PC menu mode only) (0 ↔ 31)

5Press the ESCAPE button to return to the previous menu or press the MENU button to exit the menu mode.

Note

•A dim image could be caused by insufficient adjustment of brightness and contrast. Before adjusting phase, make sure that brightness and contrast are correctly adjusted. To adjust them, refer to “Adjusting Picture Quality” on page 47.

46

Adjustment item	Button			Adjustment content
Brightness	2 or 3	Gets darker/brighter. (–30 ↔		0* ↔	+30)
Contrast	2 or 3	Gets lower/higher. (–30 ↔ 0* ↔			+30)
		Gets softer/sharper.
		• Video menu mode: (–5 ↔		0* ↔	+5)
		• PC menu mode: (1 ↔ 3* ↔		5)
Sharpness	2 or 3
			Note
		• When in the PC menu mode, if the resize function in the PC submenu is set to
			“1:1”, the image quality will not change even if the value is changed.
Color	2 or 3	Gets softer/deeper. (–30 ↔		0* ↔	+30)
		(Video menu mode only)
Tint	2 or 3	Gets reddish/greenish. (–30 ↔ 0* ↔ +30)
		(Video menu mode only)
All reset	ENTER	Resets above items to the factory set values. How to operate is mentioned below
		(next page).
* : Factory set value

■To perform All Reset

•In the Image adj. submenu, select “All reset” with the cursor button 5 or ∞, and press the ENTER button. Then, the “All reset” submenu appears on the screen.

•Press the cursor button 2 to select “Yes”, and then press the ENTER button.

•All items in the “Image adj.” submenu are reset to the factory set values and the menu returns to the previous one.

To exit the “All reset” submenu without performing All reset, select “No” with the cursor button 3 and, press the ENTER button

(To be continued on the next page)

47

ESPAÑ OL ITALIANO FRANÇ AIS DEUTSH ENGLISH