JVC DLA-M2000LU manual Projector’s buttons Select the Input source to be Projected, Adjust Focus

Basic Operations

Basic Operations

■Projector’s buttons

2. Select the Input source to be Projected

Press the VIDEO button or the PC button to switch the

Note

• The function of GL-M2915SG is to adjust the view angle

zooming by 2%. (For fine view angle adjustment)

STAND BY

LAMP TEMP

	OPERATE
HIDE
	PC
KEYSTONE	VOLUME
	VIDEO
PRESET	MENU
ESCAPE	ENTER

PC button

VIDEO button

input.

•Each time you press either button, the selected input changes as follows. The selected name appears on the top right of the image on the screen for five seconds. (Called line display.)

When you press the VIDEO button:

Y/C ↔ VIDEO

When you press the PC button:

PC1 ↔ PC2

Remote control unit	Projector
PC	PC

■ Projector’s buttons
		STAND BY
	LAMP	TEMP
		OPERATE
	HIDE
VOLUME+/-		PC
	KEYSTONE	VOLUME
button		VIDEO
	PRESET	MENU
PRESET
button

To enlarge the projected screen size

Press the ZOOM W (Wide) button.

To reduce the screen size

Press the ZOOM T (Tele) button.

Remote control unit

T

ZOOM

W

■Remote control unit

VIDEO

ESCAPE

4. Adjust Focus

No.51781

PRESET MENU

		E
		NT
		E
		R
ESCAPE	VIC SELECT
+		PC
DIGITAL	KEYSTONE	VIDEO
ZOOM
–
U	T	+
SHIFT	ZOOM	FOCUS
D	W	–

+ +

QUICK

SHUTTER ALIGN. VOLUME

––

PC button VIDEO button

ZOOM button

	VIDEO
[Screen display]
VIDEO	Line Display
Q U I C K A L I G N M E N T	PC 1
	PC 2
	Y/C
	VIDEO

*To show the line display (Y/C, VIDEO, PC1, or PC2) or not is selectable by the menu. Refer to “Setting and Adjusting Other Functions (OPTIONS)” on page 52.

Notes

button ESCAPE ENTER

■Remote control unit

	FREEZE		OPERATE
		HIDE
PRESET	PRESET		MENU
button			ENT
			E
			R
ESCAPE	ESCAPE		VIC SELECT
button			PC
	+
	DIGITAL	KEYSTONE VIDEO
	ZOOM
	–
	U	T	+
	SHIFT	ZOOM	FOCUS
	D	W	–

Adjust focus with the following buttons on the remote control unit.

To focus on farther points

Press the FOCUS + button.

To focus on nearer points

Press the FOCUS – button.

Remote control unit

+

FOCUS

–

5. Adjusting Sound Volume

■Language display

The display languages of the menus, direct buttons (DIGITAL ZOOM, KEYSTONE, VOLUME, etc) and messages is set to “ENGLISH” when the projector is bought. The display language can be selected from the following 6

• When the AV IN (Y/C or VIDEO input) terminal input signal

source is switched with the VIDEO button, it is necessary to

reconnect the audio cable to the active device since the

projector has only a single AUDIO input terminal.

• When the PC1 or PC2 input terminal signal source is

switched with the PC button, it is necessary to reconnect

the audio cable to the active device since the projector has

+	QUICK	+
SHUTTER	ALIGN.	VOLUME
–		–

VOLUME+/- button

Adjust sound volume with the VOLUME +/– buttons. When the VOLUME + or – button is pressed, “Audio-Vol” appears on the screen together with the level bar and set value (0 to 50). When “15 sec.” is displayed in the menu, “Audio-Vol” will appear in approximately 15 seconds.

languages: (Japanese)”, “English (English)”, “Deutsch (German)”, “Español (Spanish)”, “Italiano (Italian)” and “Français (French)”. (Refer to page 45.) However, some words (VIDEO, NTSC, Quick Alignment, etc) are only displayed in English.

only a single PC AUDIO input terminal.

• When no image signal is input to the selected input

terminal, the message “No image signal is inputted.” is

displayed on the screen. (Refer to page 64.)

• When the PC2 input terminal is used, “PC2 (BNC)” must be

selected from the menu options. (Refer to page 52.)

RM-M2000 REMOTE CONTROL UNIT

Audio-Vol 12

When you press the VOLUME + button:

The sound volume becomes higher. (0 → 50)

When you press the VOLUME – button:

The sound volume becomes lower. (50 → 0)

3. Adjust the Screen Size (Zooming)

How to adjust the projected screen size differs depending on the lens unit (optional) you are using.

GL-M2910G (without zooming function):

The projected screen size cannot be changed.

GL-M2915SG/GL-M2920ZG/GL-M2930SZG (with zooming function):

Adjust the projected screen size with the following buttons on the remote control unit.

1-21 32

*When the volume is set to 0, no sound will be heard from the built-in speaker.

Remote control unitProjector

+	+
VOLUME	VOLUME

––

Notes

•When “Audio-Vol” is displayed on the screen, pressing the PRESET button resets the set value to “0”.

•Press the ESCAPE button to immediately remove the volume display.

33

ESPAÑ OL ITALIANO FRANÇ AIS DEUTSH ENGLISH

DLA-M2000LU DLA-M2000LE