Press w e to select “INITIAL SET UP”, then press ENTER. Press w e to select “STB SET”, then press ENTER.
22 EN INITIAL SETTINGS
Cable Box and/or DBS Receiver Control Setting (DVD Deck Only)

The following procedure is required if you receive your TV channels through a cable box (descrambler) and/or if you receive satellite channels through DBS (Direct Broadcast Satellite) receiver. The Controller allows the unit to automatically switch the cable box or DBS receiver’s channel during timer recording.

NOTES:

●The Controller is not supplied with this unit. It can be requested by mailing in the completed JVC Cable Mouse Certificate that is included with the accessory package.

●The Controller is effective for “VCR Plus+® Timer Programing”

( pg. 41), “Manual Timer Programing” ( pg. 42), or “On-Disc Timer Programing” ( pg. 43).

●When connecting your cable box, refer to its instruction manual.

Installing Controller

1 If both a cable box and a DBS receiver are used, position the Controller so its signal reaches the receiving windows of both the cable box and DBS receiver.

2Fix securely using the adhesive strip attached on the back of the Controller.

Cable box or DBS receiver

Your unit

Controller (suggested locations)

3 Connect the controller to the unit.

a

Cable box or DBS receiver

To RF output

To Audio/video

 

output

Transmitter

 

Controller

or

 

To VHF/UHF IN

To AUDIO/

(DVD)

VIDEO INPUT

Your unit

 

If your cable box or DBS receiver does not have audio/video output connectors

Connect the RF output connector on the cable box or DBS receiver to the VHF/UHF IN (DVD) connector on the rear of your unit via antenna splitter.

If your cable box or DBS receiver has audio/video output connectors

Connect the audio/video output connectors on the cable box or DBS receiver to the AUDIO/VIDEO INPUT connectors on the rear of the unit.

●If both a cable box and a DBS receiver are used, it is recommended that you connect the DBS receiver to your unit’s AUDIO/VIDEO INPUT connectors and the cable box to your unit’s VHF/UHF IN (DVD) connector via antenna splitter.

4Connect the Controller to the CABLE BOX connector on the rear panel.

VCR/DVD

1

2

3

4

5

6

7

8

9

 

0

 

ENTER

rtw e

 

SET UP

 

Setting Brand And Channel

After installation, set the cable box or DBS receiver’s brand and channel correctly; otherwise, the Controller cannot work correctly.

●Turn on the unit.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/CABLE/DBS/DVD switch to DVD.

1 Turn on the cable box or DBS receiver.

2 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

3 Press SET UP to access the Main Menu screen.

4

5

6 Press rt to select “CABLE BOX SET” or “DBS RECEIVER SET”, then press ENTER.

7 Press rt to select “CABLE BOX OUTPUT CH” or “DBS RECEIVER OUTPUT CH”, then press ENTER.

CABLE

BOX