TROUBLESHOOTING EN 85

PLUSCODE NO. ERRORCONFIRM PLUSCODE NO. THEN RETRY

●An invalid VCR Plus+ number has been input. ( pg. 41)

GUIDE PROGRAM IS NOT SETSELECT CHANNEL YOU WANT TO RECORD

●To set the timer program using the VCR Plus+ system, the Guide Channel number must be set in advance. ( pg. 77)

CAN NOT SET VCR PLUS TIMER PROGRAMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING

CANCEL TIMER RECORDING OR INSTANT TIMER RECORDING, THEN ENTER THE PLUSCODE AGAIN

●Appears when you tried to input a PlusCode number during timer recording or instant timer recording.

REGION CODE ERRORCHECK DISC

●A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. ( pg. 9)

UNREADABLE DISC

CHECK DISC

●When an incompatible disc is loaded, 4has been pressed. ( pg. 9)

COULD NOT FORMAT THE DISCCHECK THE DISC

●Formatting is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. ( pg. 11, 78)

COULD NOT FINALIZE THE DISC

CHECK THE DISC

●Finalizing is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. ( pg. 11, 79)

COULD NOT CANCEL DISC FINALIZATION

CHECK THE DISC

●Cancelling disc finalization is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. ( pg. 11, 79)

PRESS [STOP] AGAIN TO STOP RECORDING

●During Live Memory playback, 8has been pressed. ( pg. 32)

TIMER RECORDING COMPLETED

●Timer recording has finished during Live Memory playback.

PLAYBACK WILL STOPTHEN TIMER RECORDING WILL START

●Timer recording finished during Live Memory playback, then the next timer recording is about to begin while playback continues.

COPY PROHIBITEDCAN NOT RECORD

COPY PROHIBITED

CAN NOT PLAY

●The unit has detected invalid contents at the start or in the middle of playback.

THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZEDMAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON

●An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit.

●Check the connection. ( pg. 66)

●An attempt has been made to record copy-protected contents.

●An attempt has been made to record copy-once contents on a disc that is not CPRM compatible, such as DVD-R.