OPERATIONS ON VCR DECK EN 49

Next Function Memory

The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode.

For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds.

For Automatic Power Off

Press 3, then press 1 within 2 seconds.

For Automatic Cassette Ejection After Tape Rewind Press 3, then press x (VCR EJECT) on the unit within 2 seconds.

Repeat Playback

Your unit can automatically play back the whole tape 100 times repeatedly.

1 Press 4 to start playback.

2 Press and hold 4 for over 5 seconds, then release.

● lights up on the front display panel.

●After playing back a tape 100 times, the unit stops automatically.

3 Press 8 at any time to stop Repeat Playback.

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

Manual Tracking

Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons.

1 During playback, press CH + or – on the unit simultaneously to activate manual tracking.

2 Press CH + or – to adjust the tracking manually.

●Press REC MODE again to return to automatic tracking.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking mode automatically.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK

USE

 

On-Screen Display

 

 

 

HI FI

Hi-Fi sound is played back

 

 

HI FI L

Sound on the left Hi-Fi channel is

played back

 

 

 

HI FI R

Sound on the right Hi-Fi channel is

played back

 

 

 

NORM

Sound on the normal track is played

back

 

 

 

NORM

Both sounds on the Hi-Fi track and

normal track are mixed and played

HI FI

back

 

 

 

NOTES:

●“HIFI” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●“SUPERIMPOSE” must be set to “AUTO” or the on-screen displays will not appear. ( pg. 75)

VHS Progressive Scan

You can watch the image on VCR deck in the Progressive scan mode via component video.

ATTENTION:

Your TV needs to be compatible with Progressive and to have Component video input connectors.

ASet the Progressive-compatible TV to the component input mode.

B Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit, then press PROGRESSIVE SCAN for 3 or more seconds

so that the Video output indicator ( ) lights on the front display panel.

CPress VCR/DVD repeatedly so that the VCR lamp lights up on the unit.

D Press VCR].

● “VCR]” lights up on the unit.

NOTES:

●Be sure to engage the DVD deck in stop mode.

●It is not possible to perform the above steps when the DVD deck is in timer standby mode.