JVC DR-MX10SEK Clock Setting, A, H, B - G, H Exit setup, G Set “JUST CLOCK”, C Select “CLOCK SET”, A Access the setup menu, B Select “INITIAL SET UP”

Clock Setting

9Usually performed automatically using auto setup or preset download. If cannot be set automatically in some regions, set them manually.

A Access the setup menu.

B Select “INITIAL SET UP”.

SELECT	INITIAL SET UP
	CLOCK SET

C Select “CLOCK SET”.

SELECT

B - GA, H

NOTES:

........................................................

0Just Clock (when set to AONB) adjusts the unit’s built- in clock every 3 hours from 03:00 to 21:00. The unit’s clock is also automatically adjusted at the start/end of Summer Time.

0Just Clock functions by the PDC signal.

0Just Clock does not function in the following instances.

•When the unit is on.

•When the clock is not set.

•During timer recording, EPG data downloading or Automatic Satellite Programme Recording.

•When AL-2 SELECTB is set to ASAT VIDEO/RGBB or

ASAT S-VIDEO/RGBB.

•When the reception is poor.

IMPORTANT:

........................................................

0The default setting for Just Clock is AONB.

0It is recommended to set to AONB in areas where the PDC signal can be properly received. Set to AOFFB in areas where the signal is unstable.

D Select and confirm on “YEAR”.

SELECT

YEAR

2005

CONFIRM

E Select and confirm on “DATE”.

SELECT

CONFIRM

0Press and hold the Selection Keys (FG) to change the ADATEB in 15-day intervals.

F Select and confirm on “TIME”.

SELECT

CONFIRM

0Press and hold the Selection Keys (FG) to change the ATIMEB in 30-minute intervals.

G Set “JUST CLOCK”.

ASelect and confirm on AJUST CLOCKB.

BSelect ATV PROGRAMMEB to set the channel.

H Exit setup.

34H EN