Dubbing from VHS to HDD or DVD (Entire)

ABCDEFGHILM

9Programmes recorded on a VHS tape can be dubbed in entirety to the HDD or DVD disc.

CANCEL

B - D

A Load the tape to play.

0When dubbing to a DVD disc, load a recordable disc.

B Select VHS N HDDor VHS N DVDin step B of Dubbing between HDD and DVD Deck, then select

ENTIRE. [

Dubbing

SELECT

 

 

ENTIRE

CONFIRM

 

C Set and confirm the recording.

0ADubbing from HDD or DVD to VHSB, step C [ P76].

D Select EXECUTE.

STOP

SELECT

CONFIRM

EXECUTE

NOTES:

........................................................

0Select AL/RB, ALB, ARB, or ANORMB for the playback sound.

0Starts dubbing after automatically rewinding the tape to the beginning.

0The tape will be automatically rewound when dubbing ends.

0When the HDD or DVD disc runs out of disc remaining time, the tape will automatically stop at that position and dubbing will cease.

0If there are multiple VISS signals within a tape, separate titles will be created for each VISS signal. (Auto title creation dubbing function)

When titles reach 99 on DVD or 500 on HDD, they will not be created.

0If there are blanks of more than 2 seconds on the VHS tape, the HDD/DVD will enter into pause mode. Dubbing will resume once recorded part is detected. This prevents useless recordings.

When dubbing ends, the broadcast screen appears automatically after a message is displayed.

To cancel a dubbing that is in progress

APress STOP/CLEAR ( o).

BSelect ACANCELB, then press ENTER.

EN I 77