JVC DT-V1700CG manual Distortion ADJ, Status Display, Control Lock, All reset

5.DISTORTION ADJ.

Compensates the picture

distortion. Press the button to display the setting menu illustrated on the right.

<DISTORTION ADJ.>

PINCUSHION :00

PIN.BALANCE :00

PARALLELOGRAM :00

TRAPEZOID :00 sub menu

reset

EXIT: MENU ADJUST:-+ SELECT:

6.STATUS DISPLAY

Makes the status of the input

signal appear or disappear on the screen. Press the button to display the setting menu illustrated on the right.

<STATUS DISPLAY>

STATUS DISPLAY :ON

1080/1035 :1080

EXIT: MENU ADJUST:-+ SELECT:

Item	: PINCUSHION
Adjustment
range	: –20 ~ 00 ~ +20
Function	: Compensates pincushion picture distortion.
		– : Expands both left and right sides of the
			picture.
		+ : Squeezes both left and right sides of the
			picture.
Item	: PIN.BALANCE
Adjustment
range	: –20 ~ 00 ~ +20
Function	: Adjusts the compensation balance of the
		pincushion picture distortion.

–: The picture is expanded on the left side, and squeezed on the right side.

+: The picture is squeezed on the left side, and expanded on the right side.

Item	: PARALLELOGRAM
Adjustment
range	: –20 ~ 00 ~ +20
Function	: Compensates parallelogram picture

distortion.

– : Moves the upper side of the picture to the right, and the lower side to the left.

+: Moves the upper side of the picture to the left, and the lower side to the right.

Item	: TRAPEZOID
Adjustment
range	: –20 ~ 00 ~ +20
Function	: Compensates trapezoid picture distortion.
		– : Enlarges the upper side of the picture.
		+ : Reduces the upper side of the picture.
Item	: sub menu
Adjustment range/
Settings	: Same as PINCUSHION, PIN.BALANCE,
		PARALLELOGRAM and TRAPEZOID.
Function	: Performs PINCUSHION, PIN.BALANCE,
		PARALLELOGRAM or TRAPEZOID settings in a
		single-line display. The sub menu display varies
		depending on the selected item.
Item	: reset
Function	: Sets the PINCUSHION, PIN.BALANCE,
		PARALLELOGRAM and TRAPEZOID values to
		factory-preset ones.

Item		: STATUS DISPLAY
Settings		: ON/OFF
Function		: Makes the format name appear or disappear
			when signals are input and the signal status
			appear or disappear when the input signal is
			changed.
			ON : The information is displayed.
			OFF : The information is not displayed.
Item	: 1080/1035
Settings	: 1080/1035
Function		: Makes the number of effective scanning lines
			appear or disappear when the HDTV signal is
			input.
			1080 : Sets the number to 1080. (Select when
				the digital HDTV signal is input.)
			1035 : Sets the number to 1035. (Select when
				the analog HDTV signal is input.)

7. CONTROL LOCK

Item	: CONTROL LOCK
Settings	: OFF/ON
Function	: Invalidates most of operations on the front panel
	(including menu screen operations).
	OFF : Enables normal operations.
	ON : Invalidates all operations except the power
	switch and CONTROL LOCK.

NOTE: While CONTROL LOCK is set to ON, attempting to perform any operation except power switch and CONTROL LOCK causes the “ Control lock on!” warning to appear on the screen for approx. 3 seconds. (It is possible to operate the power switch and display SETUP MENU.)

When SETUP MENU is displayed while CONTROL LOCK is set to ON, the cursor (4) is located next to CONTROL LOCK and cannot be moved.

8. all reset

Function : Sets all items in SETUP MENU to factory-preset values.

16

Untitled-1 16 01.3.27, 9:58