JVC DT-V1700CG manual  COMPONENT/RGB Input Card Optional IF-C01COMG

CONTROLS AND FEATURES

(INPUT CARD: OPTIONAL)

COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG)

G / Y

INOUT

B/PB/B-Y

INOUT

R/PR/B-Y

INOUT

HD/CS

INOUT

VD

INOUT

AUDIO

IN OUT

1

2

3

4

1 Video input/output terminals

Input (IN) and output (OUT) terminals for component (color deference) or RGB signals.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select component signal : press INPUT SELECT A/C/E button

Select RGB signal : press INPUT SELECT B/D/F button

2 Synchronized signal input/output terminals

Input (IN) and output (OUT) terminals for the vertical, horizontal or complex synchronized signals.

The synchronized signals from these terminals have priority over other terminals. When no synchronized signal is input to these terminals, the synchronized signal from the video input/output terminals (G/Y terminals) is valid. The IN and OUT terminals are bridge-connected.

(When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Compatible signal formats:

480/60i, 576/50i, 480/50p, 480/60p, 720/60p, 1035/60i, 1080/50i, 1080/60i

3 Audio input/output terminals

Input (IN) and output (OUT) terminals for audio signals. The IN and OUT terminals are bridge-connected.

4 Connection terminal (to a Multi-Format Monitor)

Attach to the connection terminal of your multi-format monitor.

VIDEO INPUT CARD (OPTIONAL: IF-C01PNG)

VIDEO1

IN	OUT	1
	VIDEO2
IN	OUT
	Y/C IN	2

EXT.SYNC	5
	3

IN OUT

AUDIO1

IN OUT 4

AUDIO2

Compatible signal formats:

NTSC, PAL, black-and-white (50 Hz/60 Hz)

*You can select “AUTO” (automatic selection), “NTSC” or “PAL” in SETUP MENU when switching NTSC or PAL. Normally select AUTO. However, if the input signal is unstable, select NTSC or PAL.

1 Video input/output terminals

Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

Select VIDEO 1 : press INPUT SELECT A/C/E button

Select VIDEO 2 : press INPUT SELECT B/D/F button

2 S-video input terminal

Input terminal for the S-video signal.

When an S-video signal is input to this terminal and a video signal is input to VIDEO 2, the S-video signal has priority over the video signal.

When choosing the S-video input, press INPUT SELECT B/D/F button.

3 Synchronized signal input/output terminals

Input (IN) and output (OUT) terminals for the complex synchronized signals.

The synchronized signals from these terminals have priority over signals from other terminals. When no synchronized signal is input to these terminals, the synchronized signal from the video input/output terminals is valid.

The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.)

4 Audio input/output terminals

Input (IN) and output (OUT) terminals for audio signals corresponding to VIDEO 1 and VIDEO 2. The IN and OUT terminals are bridge-connected.

5 Connection terminal (to a Multi-Format Monitor)

Attach to the connection terminal of your multi-format monitor.

6

Untitled-1 6 01.3.27, 9:58