JVC DZ-VCA1SE [ON], [OFF], [EEI] menu, ■MENU-PAGE1, [PAGE] menu, [GAMMA] menu, 1 MENU switch, 2 CURSOR button, [APERTURE] menu, [M. BLACK] menu, [AUXILIARY] menu

Shutter speeds 1/30 sec. is used. 1/30 sec. is not used.

Names of parts and their functions (continued)

Menu control section

1 MENU switch	2 CURSOR button
MENU	MENU
ON OFF	ON OFF

[ON]

The menu is displayed on the screen.

Select a menu item with the CURSOR button 2.

[OFF]

The menu is not displayed.

Menu settings will be stored in memory when this switch is set to [OFF]. When you finish menu setting, be sure to set this button to [OFF] before turning the power off.

•The mark (•) on the left of the menu item indicates that the item is selected.

•An up arrow (−) or down arrow (↓) on the left of a menu item indicates that items can be selected with the [UP]/[DOWN] CURSOR buttons 2.

•A right arrow (→) or left arrow (←) on the right of a menu item indicates that items can be selected with the [LEFT]/[RIGHT] CURSOR buttons 2.

The menu of this unit consists of three screens of PAGE 1 to 3.■MENU-PAGE 1

[AUXILIARY] menu

Functions of selected items are described below.

Selected items	Functions

MESSAGE	The message input with MESSAGE EDIT in
	the [START] menu on MENU-PAGE 3 is shown
	in the upper left corner of the screen.
GAIN/SHUT	The GAIN value and SHUTTER value are
	shown in the upper left corner of the screen.
OFF	No indication
W. B. NAME	"AUTO WHITE BALANCE", "MANUAL WHITE
	BALANCE", "PRESET 3200K", "PRESET
	5600K" or the setting made by a technician are
	shown when the [WHITE BALANCE] switch or
	the [PRESET W. B.] menu is used.

[PRESET W. B.] menu

Use to select one of the preset white balance settings (3200K, 5600K, or custom setting preset by a techni- cian).

When the [WHITE BALANCE] switch is set to [PRE- SET], use the [LEFT]/[RIGHT] button to select 3200K, 5600K, or the custom preset value. Select 3200K or 5600K with the [3200K/5600K] switch.

[GAMMA] menu

Select a gamma correction value or no gamma correc-

tion.
Selected items	Gamma
0.45	γ = 0.45
0.48	γ = 0.48
OFF	No gamma correction (γ = 1.0)

[APERTURE] menu

Select the contour compensation value or no contour compensation.

The leftmost setting on the minus side is for no contour compensation. Compensation values are selectable in 8 steps.

[M. BLACK] menu

Select the master black (setup) value.

4 steps in the ± direction (about 2% shift/step) with the center value standing for no setup.

[EEI] menu

Select whether or not to use the 1/30-sec. shutter speed when automatic sensitivity compensation (ALC+EEI) is used.

Selected items 1/30 1/60

[PAGE] menu

Switch menu PAGE 1 to PAGE 3 with the CURSOR [LEFT]/[RIGHT] buttons.