JVC DZ-VCA3U Names of parts and their functions (continued)

Names of parts and their functions (continued)

Output level control section

OUTPUT LEVEL

AUTO MANUAL

CAMERA

ADJUST

GAIN SHUTTER

3 4

1GAIN switch

[AUTO]

Adjusts gain automatically.

In this mode, the [GAIN UP]/[GAIN DOWN] button 3 and [SHUTTER UP]/[SHUTTER DOWN] button 4 operations are disabled.

[MANUAL]

Set to this position when adjust the [GAIN] and [SHUTTER] manually.

2ADJUST volume

Set the brightness during auto sensitivity adjustment. Enabled only when [GAIN] switch 1 is set to [AUTO].

3GAIN UP/GAIN DOWN button

[GAIN UP]

Each time this button is pressed, the gain increases by 1 dB.

[GAIN DOWN]

Each time this button is pressed, the gain decreases by 1 dB. Enabled only when [GAIN] switch 1 is set to [MANUAL]. Setting from -3dB to +24dB is possible.

OUTPUT LEVEL	WHITE BALANCE		MENU SETTING
AUTO MANUAL	AUTO MANUAL	ON	POWER
			OFF

SETTING

ONI

ADJUST		RED	BLUE
GAIN	SHUTTER		ENHANCE FREEZE	BAR

OFFO

4SHUTTER UP/SHUTTER DOWN button

Using the [SHUTTER UP] / [SHUTTER DOWN] button, the following setting is possible: 1/60, 1/100, 1/175, 1/250, 1/375, 1/500, 1/1000, 1/2000, 1/4000, 1/10000.

Enabled only when [GAIN] switch 1 is set to [MANUAL].

•When looking at the picture on the monitor while the electronic shutter is being used, the object movement appears to be discontinuous.

For example: in shutter speed of 1/2000 sec. Since the image for 1/2000 sec is taken out every 1/60 sec, this phenomenon occurs.

•When high-speed shutter is used, light may not be suffi- cient.