16

To adjust the picture tone

1

Select “USER1” or “USER2.”

• Follow steps

1

and

2

explained on page 15.

2

Select a parameter you want to adjust.

3

Adjust the parameter.

4

Repeat steps

2

to

3

to adjust other parameters.
To erase the screen,

press VFP again while holding SHIFT.

Setting the Clock

Without setting the built-in clock, you cannot use Daily
Timers (see page 29) and Sleep Timer.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL.

1

Activate the clock setting mode.

•If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.

2

Adjust the hour.

3

Adjust the minute.

Now the built-in clock starts working.

To check the current clock time during play

• While playing a DVD and MP3/WMA, you cannot check
the current clock time (see page 9).
GAMMA
Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS
Adjust if the entire picture is bright
or dark (–8 to +8).
CONTRAST
Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
ENTER
ENTER
Remote
ONLY
CLOCK/
TIMER
SET
SET
DISPLAY

Clock

Source information

UX-S77[J].book Page 16 Friday, February 27, 2004 9:24 PM