Panasonic AW-RC600P manual Gen-lock adjustment,  Horizontal phase adjustment,  Hue adjustment

Adjustment

Gen-lock adjustment

When using the gen-lock function, the phases of the signals must be adjusted to bring the phases into alignment with the other devices and camera.

Before proceeding with the adjustment, switch the camera’s video signals to color bar signals.

Horizontal phase adjustment

Using a dual-trace oscilloscope, monitor the waveforms of the gen-lock input signals (black burst signals) and video output signals, and align the horizontal phase using the horizontal phase adjustment control.

External synchronizing input signal

(black burst signal)

Horizontal phase adjustment control

Video output signal

Adjust the horizontal phase

Hue adjustment

1.Connect the video output signals to a vectorscope.

2.Set the vectorscope to the gen-lock mode using the same gen-lock signals.

3.Observe the waveforms on the vectorscope, and use the subcarrier phase coarse adjustment switch and the subcarrier phase fine adjustment control to set the colors of the color bars to the prescribed phase.

Subcarrier phase coarse adjustment switch

Subcarrier phase fine adjustment control

			MG
			R
			O
dO	20%	YL
10°	dG
0°
10°	10%		B
	dG
		G	GY
			–I

18