Panasonic AW-RC600P manual Connections, BNC connectors, and leave the other connectors unconnected

Connections

Before proceeding with the connections, ensure that the power to all the devices is off.

Be absolutely sure to use the AW-CA50A26 RCU cable to connect the RCU to the camera.

When extending the cable, use the extension-use studio cable (WV-CA26U15, WV-CA26U30 or WV-CA26U100) and extension-use joint connector (WV-CA26T26).

The maximum length to which the cable can be extended is 984 ft. (300 m) (for a camera body and lens). When using the studio card (AW-PB305) and attaching a viewfinder, it can be extended up to 328 ft. (100 m).

When the power switch of the RCU is set to ON, the power indicator LED lights up, and the camera is controlled from the RCU.

Live switcher

AW-SW350

TALLY&INCOM		TALLY&INCOM cable
VIDEO IN (S-VIDEO)		S-VIDEO cable
To VIDEO IN		BNC coaxiale cable
To PGM OUT or PVW OUT		BNC coaxiale cable
To BB OUT	BNC coaxiale cable

AC adapter

AW-PS505A

Headset AC120 V

Headset

Headset

Remote control unit

AW-RC600

50-pin connector	RCU cable
of camera	AW-CA50A26

To RGB monitor, etc.	AC 120 V
	Supplied AC cable

Convertible camera + lens + electronic viewfinder

The AW-PB305 studio card and viewfinder installation bracket are required to connect an electronic viewfinder to a convertible camera.

Notes:

When the R/G/B, Y/PR/PB and Y/C signals are used, select the required signals using the camera’s menu.

When using the S-Video signals, select Y/C using the camera’s menu. Furthermore, use either the S-Video connector or

BNC connectors, and leave the other connectors unconnected.

The S-Video connector and BNC connectors cannot be used at the same time.

Connect either the VIDEO OUT BNC connector or S-Video connector to the AW-SW350 live switcher.

Use an intercom headset suited to all the devices.

Fabricate the TALLY & INCOM cables without mixing up the signals.

13