Using the Timers
1Setting the ON time (Example: AM 10:15).
1.Press the TIMER button on the Unit for more than two seconds.
The Timer indicator lights up and the hour digit of the current ON time blinks on the display.
•When the clock is not set, “CLOCK” and “ADJUST” appear alternately on the display. Set the clock first.
Press the ¢ or 4 button on the Unit to set the hour you want the Unit to come on.
Pressing the ¢ button moves the time forwards and pressing the 4 button moves it backwards. Hold down the button to move the time rapidly.
2.Press the TIMER button.
The minute digits of the ON time blink on the display.
Set the minute you want the Unit to come on, using the ¢ or 4 button.
2Setting the OFF time (Example: PM 1:30).
1.Press the TIMER button.
The hour digit of the OFF time blinks on the display. (The same time as the ON time will be automatically set.)
Set the hour you want the Unit to be turned off, using the ¢ or 4 button.
2.Press the TIMER button.
The minute digits of the OFF time blink on the dis- play.
Set the minute you want the Unit to be turned off, us- ing the ¢ and 4 buttons.
3Selecting the music source.
1.Press the TIMER button.
The “TUNER” or “CD” blinks on the display.
2.Press the ¢ or 4 button to select the music source you want to listen to.
The display changes as shown below.
TUNERïCDï(back to the beginning)
4Setting the volume level.
1.Press the TIMER button.
The current volume setting blinks on the display.
2.Press the ¢ or 4 button to select the volume level.
0 to 50 :When the timer is turned on, the Volume will be automatically set to the selected level.
5Press the TIMER button.
The timer setting is completed and the display returns to the display before you set the Timer. The Timer indica- tor remains lit.
6Before turning off the System, prepare the music source selected in step 3.
TUNER: Tune in to the desired station.
CD: | Insert a CD. (Playback will start from the first |
| track at Timer on.) |
7Press the POWER button to turn off the System.
In standby mode, you can see the Timer indicator ( ) on the display.
• When the timer turns on, the Timer indicator starts blink- ing and the prepared source in step 6 will be played.
To cancel the timer, press the TIMER button. The Timer indicator ( ) goes out on the display.
To
At this time, you can see the current timer settings. Each setting appears on the display for two seconds in the or- der of ON time, OFF time, music source and volume.
To change the timer setting, repeat the setting pro- cedure from the beginning.
CAUTION:
•If the System is unplugged, or a power fail- ure occurs, the timer setting will be lost. You will need to reset the clock first, then the timer.
18