Toshiba D-R420KU owner manual Marker Setting, During playback, press Display or Zoom

SPECIAL PLAYBACK

Zoom Marker Setting

1)During playback, press [DISPLAY] or [ZOOM].

• If you press [ZOOM], skip to step 3.

2)Use [{ / B] to select to display the selection menu.

e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired zoom factor to zoom, then press [ENTER].

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

× 1.2

× 1.5 × 2.0

Zoom menu will appear. There are four options

(x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate.

Zoom area will be displayed.

4)Use [K / L / { / B] to select a desired zoom position, then press [ENTER].

Zoom playback will start.

Note

•When selecting a smaller factor than the current one, the zoom area will not be displayed.

•To exit the zoom menu, press [RETURN] repeatedly.

•To cancel the zoom function, select “x1.0” using [K / L], then press [ENTER] at step 3.

•You cannot slide the zoomed picture on some JPEG files.

This feature allows you to assign a specific point on a disc to be called back later.

1)During playback, press [DISPLAY] to bring up the display menu.

If the display menu is already shown, skip to step 2.

2)Use [{ / B] to select to display the marker list. e.g.) DVD-video

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

3)Use [K / L] to select a desired marker number.

When it reaches the desired point, press [ENTER].

1/ 5 1/ 5 0:01:00 / 1:23:45

DVD Video

1---

2---

3---

4---

5---

6---

The title (track) number and the time will be displayed.

4)To return to the marker:

Use [K / L] to select the desired marker number, then press [ENTER].

Note

•To clear a marker, select the marker number to be cleared, then press [CLEAR].

•All markers will be erased when you operate these operations listed below.

–Opening the disc tray

–Turning the unit into the standby mode

–Recording on a recordable disc

• You can mark up to 6 points.

56 EN

E7PCAUD_DR420KU_EN.indd 56

2/6/2009 10:55:42 AM