Toshiba D-R420KU Functional Overview, Front Panel, Rear Panel, Introduction Connections

FUNCTIONAL OVERVIEW

Front Panel

1

2

3*

4

5

6

7

8

9

1080p

1080i

720p

480p

I/y

DVD VIDEO RECORDER DR420

ON/STANDBY

OPEN/CLOSE

SKIP

STOP

PLAY

REC

L2

L3

S-VIDEO VIDEO

L

R

DV IN

15

14*

13

12

11 10

Introduction Connections

(*)The unit can also be turned on by pressing these buttons.

1.I/y ON/STANDBY button

•Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.)

•If timer programmings have been set, press to turn the unit into the timer-standby mode.

2.Disc tray

•Place a disc when the disc tray is opened.

3.A OPEN/CLOSE button*

•Press to open or close the disc tray.

4.Infrared sensor window

•Receive signals from your remote control so that you can control the unit from a distance.

5.SKIP H button

•During playback, press once midway through a chapter or track to go back to the beginning of the current chapter or track. When pressed twice in quick succession, playback will start from the preceding chapter or track.

•During playback, press and hold for 1.5 seconds to fast reverse.

•When playback is paused, press to play back reverse step by step.

•When playback is paused, press and hold for 1.5 seconds to slow reverse.

6.SKIP G button

•During playback, press to skip to the next chapter or track.

•During playback, press and hold for 1.5 seconds to fast forward.

•When playback is paused, press to play back advance step by step.

•When playback is paused, press and hold for 1.5 seconds to slow forward.

7.Display

•Refer to “FRONT PANEL DISPLAY GUIDE” on page 17.

8.HDMI indicator

•Lights up and indicates the HDMI video resolution when HDMI output is on.

9.DV IN jack (L3)

•Use to connect the DV output of external device with a DV cable.

10.AUDIO input jacks (L2)

•Use to connect external device with an RCA audio cable.

11.VIDEO input jack (L2)

•Use to connect external device with an RCA video cable.

12.S-VIDEO input jack (L2)

•Use to connect the S-video output of external device with an S-video cable.

13.I REC button

•Press once to start a recording. Press repeatedly to start one-touch timer recording.

14.B PLAY button*

•Press to start or resume playback.

15.C STOP button

•Press to stop playback or recording.

Disc Basic Setup Management Recording Playback

Rear Panel

1 2 3 4

VIDEO VIDEO
	IN	OUT		Y
L			L			HDMI OUT
				PB/CB
R		IN	R	PR/CR	OUT	COAXIAL
AUDIO IN	S-VIDEO		AUDIO OUT	COMPONENT	S-VIDEO	DIGITAL AUDIO OUTPUT
(L1)				VIDEO OUT		PCM / BITSTREAM

10 9 8 7 6

1.VIDEO IN jack (L1)

•Use to connect external device with an RCA video cable.

2.VIDEO OUT jack

•Use to connect a TV monitor, AV receiver or other device with an RCA video cable.

3.COMPONENT VIDEO OUT jacks

•Use to connect a TV monitor with component video inputs with a component video cable.

4.HDMI OUT jack

•Use an HDMI cable to connect to a display with an HDMI compatible port.

5.AC Power Cord

•Connect to a standard AC outlet to supply power to this unit.

•Unplug this cord from the AC outlet to completely shut down the unit.

6.COAXIAL DIGITAL AUDIO OUTPUT jack

•Use to connect an AV receiver, Dolby Digital decoder, DTS decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.

5

7.S-VIDEO OUT jack

•Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.

8.AUDIO OUT jacks

•Use to connect a TV monitor, AV receiver or other device with an RCA audio cable.

9.S-VIDEO IN jack (L1)

•Use to connect the S-video output of external device with an S-video cable.

10.AUDIO IN jacks (L1)

• Use to connect external device with an RCA audio cable.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

EN 11

Editing Function Setup Others

E7PCAUD_DR420KU_EN.indd 11

2/6/2009 10:55:23 AM