Toshiba D-R420KU owner manual Timer Recording, Use K / L to enter the date, then press B

TIMER RECORDING

Introduction

3Use [K / L] to enter the date, then press [B].

Date		Start		End
JAN/02	- - : - -			- - : - -
L1/L2		Mode
L1		SP
			SP	2	: 00

JAN/01

	When pressing [L] at
Daily
	the current date, the
MON-SAT
	date will change as
MON-FRI
	follows.
SAT
	e.g.) January 1st
FRI
SUN

JAN/31

4Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B].

Date		Start		End
JAN/02	1	: 00AM	- - : - -
L1/L2		Mode

L1SP

SP 2 : 00

•You cannot make a program whose recording time exceeds 12 hours.

5Use [K / L] to select an appropriate external input (L1/L2) to which your external tuner is connected, then press [B].

Date	Start	End
JAN/02	1 : 00AM	2 : 00AM
L1/L2	Mode

L1SP

SP 1 : 00

6Use [K / L] to select a recording mode.

Date	Start	End
JAN/02	1 : 00AM	2 : 00AM
L1/L2	Mode

L1SP

SP 1 : 00

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

Date	Start	End
JAN/02	1 : 00AM	2 : 00AM
L1/L2	Mode

L1 Auto

Auto 1 : 00

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short, when the available recording space of the disc is too limited.

Press [ENTER] when all items are entered.

After displaying an instructive message for 10
7 seconds, timer program list will appear.
Press ON/STANDBY to Timer Standby mode.
Ensure the external source is turned to
the correct channel.
Timer Programming
JAN/ 2/09 1:00 AM L1 SP
SP (1:00)		THU JAN/01 10:00AM
Date	Start	End	L1/L2
JAN/02	1:00AM	2:00AM	L1

Your program setting is stored.

•To set another program, repeat steps 2 to 7.

•To exit, press [TIMER PROG.] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue. To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 40.

Press [I/yON/STANDBY] to set a timer programming.

8		will appear on the front panel display, while this
	unit waits to make the recording.
		CS DR	CD
			HDD

Disc Connections Basic Setup Management Recording Playback Editing Function

Refer to “Recording Mode” on page 33.

•You can check the remaining recordable space of the disc when you select the recording mode.

Date	Start		End
JAN/02	1 : 00AM	2 : 00AM
L1/L2	Mode
L1	SP
		SP	1 : 00

Setup Others

EN 39

E7PCAUD_DR420KU_EN.indd 39

2/6/2009 10:55:33 AM