ENGLISH
Storing your own sound adjustment
You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
See page 15 for details.
SCM
2 Select “BAS” (bass) or “TRE” (treble).
3 Adjust the bass or treble level.
See page 14 for details.
4 Repeat steps 2 and 3 to adjust the other items.
5 To turn ON/OFF the loudness function.
See page 14 for details.
6 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the selected sound
mode is stored in memory.
SCM
7 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 15.
16
