JVC GET0091-001A, KD-SX980 Tuning in to a preset station

10

ENGLISH

Manual preset

You can preset up to 6 stations in each band (FM1,

FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band

1

Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Each time you press the

button, the band changes

as follows:

2

Tune in to a station of 88.3 MHz.

3

Press and hold the number button (in

this example, 1) for more than 2

seconds.

4

Repeat the above procedure to store

other stations into other preset

numbers.

Notes:

• A previously preset station is erased when a new station

is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example, during

battery replacement). If this occurs, preset the stations

again.

Tuning in to a preset station

You can easily tune in to a preset station.

Remember that you must store stations first. If you

have not stored them yet, see “Storing stations in

memory” on pages 9 and 10.

1

Select the band (FM1 – 3, AM).

2

Select the number (1 – 6) for the preset

station you want.

Note:

You can also use the 5 (up) or ∞ (down) buttons on

the unit to select the next or previous preset stations.

Each time you press the 5 (up) or ∞ (down) buttons,

the next or previous preset station is tuned in.

Selected band/preset number and

“MEMO” (memory) appear

alternately for a while.

FM1 FM2 FM3 AM

(F1)

FM1 FM2 FM3 AM

(F1) (F2) (F3) (AM)

Press ¢ to tune

in to stations of higher

frequencies.

Press 4 to tune

in to stations of lower

frequencies.

EN08-10.KD-SX980[J]f.pm5 7/1/02, 3:19 PM10

Contents

Main INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL DINSTRUCTIONS RECEPTOR CON CD KD-SX980 RECEPTEUR CD KD-SX980 Detachable CD RECEIVER KD-SX980 IMPORTANT FOR LASER PRODUCTS How to reset your unit CONTENTS Control panel LOCATION OF THE BUTTONS Display window Preparing the remote controller 3. Installing the battery 1. WARNING: Remote controller RMRK50 BASIC OPERATIONS Adjust the volume. Select the source. Adjust the sound as you want. (See pages 21 23.) To drop the volume in a moment RADIO BASIC OPERATIONS Listening to the radio Searching a station automatically: Auto search Select the band (FM1 3, AM). Start searching a station. Storing stations in memory FM station automatic preset: SSM Select the FM band (FM1 3) you want to store FM stations into. Press and hold both buttons for more than 2 seconds. Tune in to a station you want while MANU is flashing. Tuning in to a preset station FM1 FM2 FM3 AM CD OPERATIONS Playing a CD Open the control panel. Insert a disc into the loading slot. Close the control panel by hand. Locating a track or particular portion on a disc To fast-forward or reverse the track To go to the next track or the previous tracks To go to a particular track directly Selecting CD playback modes Prohibiting CD ejection While pressing CD CD-CH, press and hold for more than 2 seconds. Playing a CD Text Select text display mode while playing a CD Text. Disc Title / Performer Track Title Current track no. and Elapsed playing time MP3 INTRODUCTION How are MP3 files recorded and played back? Precautions when recording MP3 files on a CD-R or CD-RW What is MP3? Compatible with ID3v1 MP3 directory/file configuration 02 04 Level 6 03 05 09 MP3 OPERATIONS Playing an MP3 disc Open the control panel. Insert an MP3 disc into the loading slot. Close the panel by hand. Locating a file or particular portion on an MP3 disc Elapsed playing time (with track No.) To fast-forward or reverse the file To stop play and eject the disc Directory name File name Elapsed playing time (with track No.) To skip to the next directory To go to a particular directory directly To skip to the previous directory Selecting MP3 playback modes To play back files at random (Random Play) 2 RND1 RND2 To play back files repeatedly (Repeat Play) 2 RPT1 RPT2 To play back only intros (Intro scan) 2 SOUND ADJUSTMENTS Adjusting the sound Select the item you want to adjust. Adjust the level. VOL Selecting preset sound modes (C-EQ: custom equalizer) Press EQ. Select the sound mode you want. To store a sound mode separately for each playback source (C-EQ Link) 1 Storing your own sound adjustments OTHER MAIN FUNCTIONS Setting the clock Changing the general settings (PSM) Basic Procedure Repeat steps 2 and 3 to adjust the other PSM items if necessary. Preferred Setting Mode (PSM) items Finish the setting. To set Custom Equalizer Link To set the clock display To select the level meter To select the dimmer mode To turn on/off the key-touch tone Assigning names to the sources Select a source you want to assign a name to. Press and hold SEL (select) for more than 2 seconds while pressing DISP (display). To erase the input characters Attaching the control panel Detaching the control panel Detaching the control panel CD CHANGER OPERATIONS Playing CDs CD CD-CH Select the CD automatic changer (CD-CH). To go to a particular disc directly To show the CD Text information Select text display mode while playing a CD Text. To fast-forward or reverse the track To go to the next track or the previous tracks Selecting CD playback modes To play back tracks at random (Random Play) 2 To play back tracks repeatedly (Repeat Play) 2 EXTERNAL COMPONENT OPERATIONS Turn on the connected component and start playing the source. Adjust the volume. Adjust the sound characteristics you want. (See pages 21 23.) Playing an external component TROUBLESHOOTING Page Handling discs How to handle discs To keep discs clean To play new discs MAINTENANCE Moisture condensation When playing a CD-R or CD-RW CAUTIONS: CD PLAYER SECTION SPECIFICATIONS Having TROUBLE with operation? Please reset your unit Still having trouble?? Call 1-800-252-5722 http://www.jvc.com